Product Talk
11/1/24 - GC America MI Paste® - Brian Nový, DDS
Brian Nový, DDS, shares his experience using GC America’s MI Paste® with the host of Product Talk, Mike DiTolla, DDS.
Inside Dentistry's Roundtable
9/26/24 - Advances in Endodontic Technology
Brooke Blicher, DMD; Rebekah Pryles, DMD; and Michael Tulkki, DDS, MS discuss advances in endodontic technology in what promises to be a conversation that gets straight to the root of the matter.
Remove biofilm, plaque and calculus thoroughly with ease
9/11/24 - Episode 15
Using this simple, fact acting gel can protect your patients teeth and restorations from biofilm buildup that promotes decay and failure.
Product Talk
7/1/24 - GC America GC Initial® LiSi Block - Paresh Shah, DMD, MS
Paresh Shah, DMD, MS, shares his experience using GC Initial® LiSi Block from GC America with the host of Product Talk, Mike DiTolla, DDS.
IDT Weekly
3/25/24 - Episode 273
Updates on IDT board member Josef Kolbeck and 3D Systems, plus Q&As with Jack Marrano, CDT, MICOI (https://www.aegisdentalnetwork.com/idt/2024/03/the-capabilities-of-multilayer-zirconia), and Julian Conejo, DDS, MSc (https://www.aegisdentalnetwork.com/idt/2024/03/smaller-particles-big-potential), and an article spotlighting the development of Carbon’s new AO suite (https://www.aegisdentalnetwork.com/idt/2024/04/viewpoint-carbon-aims-for-innovation-with-ao-suite).
IDT Product Talk
10/3/23 - Bob Ziemek - Strategy Milling
Bob Ziemek discusses his experience with Strategy Milling with the host of IDT’s Product Talk, Peter Pizzi, MDT, CDT.
GC America MI Paste® - Brian Nový, DDS
11/1/24 - S19 E2
Brian Nový, DDS, shares his experience using GC America’s MI Paste® with the host of Product Talk, Mike DiTolla, DDS.
Neodent® NeoConvert™ - Drew Phillips, DMD
7/1/24 - S18 E3
Drew Phillips, DMD, shares his experience the Neodent® NeoConvert™ with the host of Product Talk, Mike DiTolla, DDS.
GC America GC Initial® LiSi Block - Paresh Shah, DMD, MS
7/1/23 - S18 E2
Paresh Shah, DMD, MS, shares his experience using GC Initial® LiSi Block from GC America with the host of Product Talk, Mike DiTolla, DDS.
The GentleWave® System from Sonendo - Michael Ribera, DMD
4/1/24 - S17 E2
Michael Ribera, DMD, shares his experience using The GentleWave® System from Sonendo with the host of Product Talk, Mike DiTolla, DDS.
Bien Air Nova Handpieces - Robert C. Margeas, DDS
4/1/24 - S17 E1
Robert C. Margeas, DDS, shares his experience using Bien Air Nova Handpieces with the host of Product Talk, Mike DiTolla, DDS.
Nobel Biocare N1™ System - Bobby Birdi, DMD, MSc
11/1/23 - S16 E3
Bobby Birdi, DMD, MSc shares his experience using the Nobel Biocare N1™ System with the host of Product Talk, Mike DiTolla, DDS.
C-Series™ TR™ Carbides - Paul Rosen, DMD, MS
11/1/23 - S16 E1
Paul Rosen, DMD, MS, shares his experience using Brasseler’s C-Series™ TR™ Carbides with the host of Product Talk, Mike DiTolla, DDS.
Pulpdent’s ACTIVA™ BioACTIVE-RESTORATIVE™ - Leonard Hess, DDS
7/1/23 - S15 E1
Leonard Hess, DDS, shares his experience using ACTIVA™ BioACTIVE-RESTORATIVE™ with the host of Product Talk, Mike DiTolla, DDS.
Zest Dental Solutions’ LOCATOR FIXED™ - Michael D. Scherer, DMD, MS
4/1/23 - S14 E4
Michael D. Scherer, DMD, MS, shares his experience using Zest Dental Solutions’ LOCATOR FIXED™ with the host of Product Talk, Mike DiTolla, DDS.
Henry Schein Dental’s ACCLEAN® - Joy D. Void-Holmes, RDH, BSDH, DHSc
4/1/23 - S14 E2
Joy D. Void-Holmes, RDH, BSDH, DHSc, shares her experience using Henry Schein Dental’s ACCLEAN® with the host of Product Talk, Mike DiTolla, DDS.
Brasseler’s Matrix1™ Rapid Provisional & Lingual Matrix Material - Robert C. Margeas, DDS
4/1/23 - S14 E1
Robert C. Margeas, DDS, shares his experience using Brasseler’s Matrix1™ Rapid Provisional & Lingual Matrix Material with the host of Product Talk, Mike DiTolla, DDS.
Straumann’s The CARES® P series 3D printer - Corey Raymond, DMD
11/1/22 - S13 E5
Corey Raymond, DMD, shares his experience using Straumann’s The CARES® P series 3D printer with the host of Product Talk, Mike DiTolla, DDS.
Glidewell Dental’s Guiding Leaders - Stephenie Goddard
11/1/22 - S13 E3
Stephenie Goddard shares information about Glidewell Dental’s Guiding Leaders professional development program with the host of Product Talk, Mike DiTolla, DDS.
GC America’s everX Flow™ - Ron Kaminer, DDS
11/1/22 - S13 E2
Ron Kaminer, DDS, shares his experience using GC America’s everX Flow™ with the host of Product Talk, Mike DiTolla, DDS.
Brasseler’s DualForce™ Sectional Matrix System- Dean E. Kois, DMD
11/1/22 - S13 E1
Dean E. Kois, DMD, shares his experience using Brasseler’s DualForce™ Sectional Matrix System with the host of Product Talk, Mike DiTolla, DDS.
Neodent® Zirconia Implant System - Paul Petrungaro, DDS, MS
7/1/22 - S12 E3
Paul Petrungaro, DDS, MS, shares his experience using the Neodent® Zirconia Implant System with the host of Product Talk, Mike DiTolla, DDS.
BRILLIANT EverGlow® - Brian LeSage, DDS
7/1/22 - S12 E2
Brian LeSage, DDS, shares his experience using BRILLIANT EverGlow® with the host of Product Talk, Mike DiTolla, DDS.
Chad C. Duplantis, DDS - The iTero Element® 5D Plus
7/1/22 - S12 E1
Chad C. Duplantis, DDS, shares his experience using The iTero Element® 5D Plus with the host of Product Talk, Mike DiTolla, DDS.
Justin Chi, DDS, CDT - Glidewell Dental glidewell.io™ In-Office Solution
4/1/22 - S11 E4
Justin Chi, DDS, CDT, shares his experience using the glidewell.io™ In-Office Solution with the host of Product Talk, Mike DiTolla, DDS.
Marcos Vargas, BDS, DDS, MS – GC America G-ænial A’CHORD
4/1/22 - S11 E3
Marcos Vargas, BDS, DDS, MS, shares his experience using G-ænial A’CHORD with the host of Product Talk, Mike DiTolla, DDS.
Robert C. Margeas, DDS – Brasseler Evanesce™ Universal Restorative Composite
4/1/22 - S11 E2
Robert C. Margeas, DDS, shares his experience using Evanesce™ Universal Restorative Composite with the host of Product Talk, Mike DiTolla, DDS.
Jeffrey Lineberry, DDS - Whip Mix VeriONE Digital Workflow
9/29/21 - S10 E10
Jeffrey Lineberry, DDS, shares his experience using the VeriONE Digital Workflow with the host of Product Talk, Mike DiTolla, DDS.
Gary M. Radz, DDS - Tokuyama OMNICHROMA® FLOW
9/29/21 - S10 E9
Gary M. Radz, DDS shares his experience using OMNICHROMA® FLOW with the host of Product Talk, Mike DiTolla, DDS.
Ira Langstein, DDS - Straumann Smile in a Box®
9/29/21 - S10 E8
Ira Langstein, DDS, shares his experience using Smile in a Box® with the host of Product Talk, Mike DiTolla, DDS.
Joy Void-Holmes, RDH - Henry Schein Single-Use Aerosol Evacuator
9/29/21 - S10 E6
Joy Void-Holmes, RDH, shares her experience using The Single-Use Aerosol Evacuator with the host of Product Talk, Mike DiTolla, DDS.
John Nosti, DMD - GC America G-CEM ONE™
9/29/21 - S10 E5
John Nosti, DMD, shares his experience using G-CEM ONE™ with the host of Product Talk, Mike DiTolla, DDS.
Frank Milnar, DDS - Coltene BRILLIANT EverGlow®
9/29/21 - S10 E4
Frank Milnar, DDS, shares his experience using BRILLIANT EverGlow® with the host of Product Talk, Mike DiTolla, DDS.
Leonard Hess, DDS - AMD Lasers Monet™ Laser Curing Light
9/29/21 - S10 E2
Leonard Hess, DDS, shares his experience using The Monet™ Laser Curing Light with the host of Product Talk, Mike DiTolla, DDS.
Cary Goldstein, DMD, and Christina Callaghan - 3M™ Attest™ Mini Auto-reader 490M
9/29/21 - S10 E1
Cary Goldstein, DMD, and Christina Callaghan, share their experience using 3M™ Attest™ Mini Auto-reader 490M with the host of Product Talk, Mike DiTolla, DDS.
Christopher Ramsey, DMD - 3M Universal Two-Component System
6/1/21 - S9 E1
Christopher Ramsey, DMD, shares his experience using the 3M™ Relyx™ Universal Resin Cement And 3M™ Scotchbond™ Universal Plus Adhesive System with the host of Product Talk, Mike DiTolla, DDS.
Robert C. Margeas, DDS - BISCO TheraBase™
6/1/21 - S9 E2
Robert C. Margeas, DDS, shares his experience using TheraBase™ with the host of Product Talk, Mike DiTolla, DDS.
Sam Alborz, DDS - Coltene HyFlex® EDM Files
6/1/21 - S9 E3
Sam Alborz, DDS, shares his experience using HyFlex® EDM Files with the host of Product Talk, Mike DiTolla, DDS.
Leonard Hess, DDS - VOCO VisCalor® bulk
3/1/21 - S8 E1
Leonard Hess, DDS, shares his experience using VisCalor® bulk with the host of Product Talk, Mike DiTolla, DDS.
Elizabeth Bakeman, DDS - Kulzer Venus® Diamond ONE and Venus® Pearl ONE
12/1/20 - S7 E3
Elizabeth Bakeman, DDS, shares her experience using Venus® Diamond ONE and Venus® Pearl ONE with the host of Product Talk, Mike DiTolla, DDS.
Robert Ritter, DMD – GC FujiCEM® Evolve
12/1/20 - S7 E2
Robert Ritter, DMD, shares his experience using GC FujiCEM® Evolve with the host of Product Talk, Mike DiTolla, DDS.
John Nosti, DMD - GC everX Flow™
12/1/20 - S7 E1
John Nosti, DMD, share his experience using everX Flow™ with the host of Product Talk, Mike DiTolla, DDS.
Richard Lechner, DDS - DentalVibe®
9/1/20 - S6 E1
Richard Lechner, DDS, shares his experience using DentalVibe® with the host of Product Talk, Mike DiTolla, DDS.
Amanda Seay, DDS - 3M™ Filtek™ Supreme Flowable Restorative
6/5/20 - S5 E1
Amanda Seay, DDS, shares her experience with the new delivery system for 3M™ Filtek™ Supreme Flowable Restorative with the host of Product Talk, Mike DiTolla, DDS.
Adamo E. Notarantonio, DDS, FICOI, FAACD - BISCO ALL-BOND UNIVERSAL®
6/1/20 - S5 E2
Adamo E. Notarantonio, DDS, FICOI, FAACD, shares his experience using BISCO’s ALL-BOND UNIVERSAL® with the host of Product Talk, Mike DiTolla, DDS.
Clint Stevens, DDS – Planmeca FIT®
3/1/20 - S4 E2
Clint Stevens, DDS, shares his experience using the Planmeca FIT CAD/CAM system with the host of Product Talk, Mike DiTolla, DDS.
Dean E. Kois, DMD, MSD - Anutra Medical Local Anesthetic Delivery System
3/1/20 - S4 E1
Dean E. Kois, DMD, MSD, shares his experience using the Anutra Medical Local Anesthetic Delivery System with the host of Product Talk, Mike DiTolla, DDS.
Edgard El Chaar, DDS, MS - Zimmer Biomet Trabecular Metal™ Dental Implants
11/1/19 - S3 E9
Robert Margeas, DDS - Kuraray Noritake PANAVIA™ SA Cement Universal
11/1/19 - S3 E7
Amanda Seay, DDS - GC America G-ænial™ Universal Injectable
11/1/19 - S3 E6
Robert Margeas, DDS - GC America EQUIA Forte® HT
11/1/19 - S3 E5
Peter Harnois, DDS - DenMat Additive-Reductive Template
11/1/19 - S3 E3
Peter Harnois, DDS, shares his experience using the DenMat Additive-Reductive Template (ART) with the host of Product Talk, Mike DiTolla, DDS.
Theodore P. Croll, DDS - BISCO TheraCal PT™
11/1/19 - S3 E2
Theodore P. Croll, DDS, shares his experience using BISCO TheraCal PT™ with the host of Product Talk, Mike DiTolla, DDS.
G. Franklin Shull, DMD - 3M Filtek™ Universal
11/1/19 - S3 E1
G. Franklin Shull, DMD, shares his experience using 3M Filtek™ Universal with the host of Product Talk, Mike DiTolla, DDS.
Walter Renne, DDS - Planmeca Creo™ C5
6/1/19 - S2 E2
Joyce Bassett, DDS – NSK Ti-Max nano/NLZ E
6/1/19 - S2 E1
Robert Ritter, DMD – Kulzer cara Print 4.0
12/4/18 - S1 E12
Robert Ritter, DMD discusses his experience using the Kulzer cara Print 4.0 with the host of Product Talk, Michael DiTolla, DDS, FAGD
Leonard Hess, DDS - Bien-Air Optima MX2 INT
11/25/18 - S1 E10
Paul Petrungaro, DDS, MS – Zest Locator F-Tx Implants
11/15/18 - S1 E9
Elizabeth Bakeman, DDS – GC America G-aenial BULK Injectable
11/15/18 - S1 E8
Leonard Hess, DDS - Shofu EyeSpecial C-III
11/9/18 - S1 E6
Cary Goldstein, DMD – Bisco TheraCem™
10/30/18 - S1 E5
Leonard Hess, DDS - 3M™ Impregum™ Super Quick
10/30/18 - S1 E4
G. Franklin Shull, DMD - GC Fuji Automix LC
10/16/18 - S1 E2
IDT Weekly
3/25/24 - S6 E13
Updates on IDT board member Josef Kolbeck and 3D Systems, plus Q&As with Jack Marrano, CDT, MICOI (https://www.aegisdentalnetwork.com/idt/2024/03/the-capabilities-of-multilayer-zirconia), and Julian Conejo, DDS, MSc (https://www.aegisdentalnetwork.com/idt/2024/03/smaller-particles-big-potential), and an article spotlighting the development of Carbon’s new AO suite (https://www.aegisdentalnetwork.com/idt/2024/04/viewpoint-carbon-aims-for-innovation-with-ao-suite).
IDT Weekly
3/18/24 - S6 E12
Updates on Candulor’s Kunstzahnwerk competition (https://www.candulor.com/en-us/kunstzahnwerk-competition-2025) and Carbon, plus a CE article on 3D printable materials for permanent restorations (https://idt.cdeworld.com/courses/5426-hybrid-ceramic-permanent-restorations).
IDT Weekly
3/11/24 - S6 E11
Updates on Carestream Dental, Align Technology, and Panthera Dental, plus a cover story on bonding (https://www.aegisdentalnetwork.com/idt/2024/03/bonding-through-collaboration).
IDT Weekly
3/4/24 - S6 E10
Updates on Dentsply Sirona and Talladium Milling Center, plus a MasterClass on a challenging remake case (https://www.aegisdentalnetwork.com/idt/2024/03/new-case-old-patient) and updates on the IDT Live Digital Dentistry Symposium (idtlive.cdeworld.com).
IDT Weekly
2/26/24 - S6 E9
Updates on the AACD, Dentsply Sirona, and the NADL (https://nadl.org/news/#n2994), plus a column about technological assessment (https://www.aegisdentalnetwork.com/idt/2024/02/technological-assessment).
IDT Weekly
2/19/24 - S6 E8
Updates on IDT at the Chicago Midwinter Meeting, a new milling machine from Amann Girrbach, and the AACD’s Scientific Session (aacdconference.com), plus a showcase of 3D printable materials (https://lsc-pagepro.mydigitalpublication.com/publication/?m=14255&i=813808&p=24&pp=1&ver=html5).
IDT Weekly
2/12/24 - S6 E7
Updates on the IDT Live Digital Dentistry Symposium (idtlive.cdeworld.com) and Dentsply Sirona, plus a TechEdge article on 3D printable materials (https://www.aegisdentalnetwork.com/idt/2024/02/understanding-3d-printing-material-options).
IDT Weekly
2/5/24 - S6 E6
Updates on the IDT Live Digital Dentistry Symposium (idtlive.cdeworld.com) and Absolute Dental Services (https://www.instagram.com/artconsultingllc/), plus a MasterClass about a collaborative implant case involving challenging shade matching (https://www.aegisdentalnetwork.com/idt/2024/02/anterior-tooth-replacement-in-an-adolescent-with-a-high-smile-line-1), and IDT’s free on-demand webinars library (https://www.aegisdentalnetwork.com/idt/webinars).
IDT Weekly
1/29/24 - S6 E5
Updates on the upcoming exocad Insights conference (exocad.com/insights2024), Dentsply Sirona’s partnership with the International Association for Disability & Oral Health, and Sierra Dental Tool, plus a CE article on hygiene for dental restorations (https://idt.cdeworld.com/courses/5421-preserving-oral-health).
IDT Weekly
1/22/24 - S6 E4
Updates on Henry Schein’s “Holiday Cheer for Children,” an honor for Roland DGA, and a new validation for Pac-Dent, plus a cover story on economy-related factors impacting the industry.
IDT Weekly
1/15/24 - S6 E3
An interview with Steven A. Brisman, DMD, a keynote speaker at the IDT Live Digital Dentistry Symposium on April 12-13 in Indianapolis (idtlive.cdeworld.com).
IDT Weekly
1/8/24 - S6 E2
An interview with Wendy Clark, DDS, MS, a keynote speaker at the IDT Live Digital Dentistry Symposium on April 12-13 in Indianapolis (idtlive.cdeworld.com).
IDT Weekly
1/1/24 - S6 E1
Updates on Dental Alliance Group and Dentsply Sirona’s Implant Solutions World Summit (dentsplysirona.com/worldsummit), a preview of IDT’s January/February issue, and a free CE webinar on printed dentures (https://idt.cdeworld.com/webinars/23007-revolutionizing-complete-denture-prosthetics).
IDT Weekly
12/25/23 - S5 E52
Updates on VHF, Zahn Dental, and 3M, plus an article on sintering furnaces (https://www.aegisdentalnetwork.com/idt/2023/12/pay-attention-to-your-ovens).
IDT Weekly
12/18/23 - S5 E51
Updates on the NADL’s Vision 21 meeting (nadl.org) and Dentsply Sirona, plus a CE article on in-house abutment fabrication (https://idt.cdeworld.com/courses/5414-in-house-custom-abutment-manufacturing-options) and a free ebook on technology investments (https://www.aegisdentalnetwork.com/idt/ebooks/idts-why-i-invested).
IDT Weekly
12/11/23 - S5 E50
Updates on LuxCreo, a partnership between Roland DGA and Straumann, and Dentsply Sirona, plus a MasterClass featuring a collaborative case (https://www.aegisdentalnetwork.com/idt/2023/12/overcoming-shade-challenges).
IDT Weekly
12/4/23 - S5 E49
Updates on the AACD and Pac-Dent, plus a cover story on trends in dentistry (https://www.aegisdentalnetwork.com/idt/2023/12/trends-in-dentistry-2023-1) and a free webinar, “Operational Efficiency and Its Impact on the Bottom Line” (https://www.aegisdentalnetwork.com/idt/webinars/421).
IDT Weekly
11/27/23 - S5 E48
Updates on the Greater New York Dental Meeting and a new scanner from Amann Girrbach, plus the Game-Changing Products section of IDT’s Product iNavigator (https://lsc-pagepro.mydigitalpublication.com/publication/?m=14255&i=806763&p=64&pp=1&ver=html5) and a free live webinar on 3D printing dentures (https://idt.cdeworld.com/webinars/register/22936-revolutionizing-complete-denture-prosthetics).
IDT Weekly
11/20/23 - S5 E47
Updates on from Ivoclar (ivoclar.com/en_li/ivoclarjoy), exocad (promo.exocad.com/en/trade-up-2023), and DMG, plus Shop-and-Compare charts for Millable Materials (https://lsc-pagepro.mydigitalpublication.com/publication/?m=14255&i=806763&p=30&pp=2&ver=html5) and Printable Materials (https://lsc-pagepro.mydigitalpublication.com/publication/?m=14255&i=806763&p=46&pp=2&ver=html5) in our Product iNavigator.
IDT Weekly
11/13/23 - S5 E46
Updates on the IDT Live Digital Dentistry Symposium (idtlive.cdeworld.com), the Panthera Master Cup (pantheradental.com/master-cup), and VHF, plus shop-and-compare charts on technology products in the Product iNavigator (https://www.aegisdentalnetwork.com/idt/2023/11).
IDT Weekly
11/6/23 - S5 E45
Updates on a new product from VITA, Ivoclar Academy’s Summer School (ivoclar.com/waiting-list-2024), and a new bundle from Buffalo Dental Manufacturing, plus the annual Product iNavigator buyer’s guide (https://www.aegisdentalnetwork.com/idt/2023/11).
IDT Weekly
10/31/23 - S5 E44
Updates on Ivoclar’s executive team and an anniversary for Amann Girrbach (us.ag.store), plus a showcase of digital denture products (https://lsc-pagepro.mydigitalpublication.com/publication/?m=14255&i=803191&p=24&pp=1&ver=html5) and a free upcoming live webinar on sound operational management and manufacturing processes (https://idt.cdeworld.com/webinars/register/22919-operational-efficiency-and-its-impact-on-the-bottom-line).
IDT Weekly
10/30/23 - S5 E43
Updates on the IDT Live Digital Dentistry Symposium (idtlive.cdeworld.com) and Dentsply Sirona World (dentsplysirona.com), plus a CE article on resin-based materials (https://idt.cdeworld.com/courses/5405-resin-based-materials-for-indirect-dental-restorations) and a free webinar on precision jaw movements (https://www.aegisdentalnetwork.com/idt/webinars/404).
IDT Weekly
10/16/23 - S5 E42
Updates on a partnership between Dentsply Sirona and 3Shape and an anniversary for VHF, plus a digital dentures article from Oscar Galvis, CDT, MDT, MS (https://www.aegisdentalnetwork.com/idt/2023/10/knowledge-and-skills-remain-key) and a free webinar hosted by Minh Tran (https://www.aegisdentalnetwork.com/idt/webinars).
IDT Weekly
10/09/23 - S5 E41
Updates on 2.0 Consulting LLC (2pt0consulting.com) and exocad Insights 2024 (exocad.com/insights2024), plus a MasterClass on dentures (https://www.aegisdentalnetwork.com/idt/2023/10/full-denture-prosthetics-the-ultimate-discipline) and a free on-demand CE webinar from Quint Whipple, CDT (https://idt.cdeworld.com/webinars/22930-combining-tried-and-true-techniques-with-state-of-the-art-technology).
IDT Weekly
10/2/2023 - S5 E40
Updates on Shofu and Smart Dentistry Solutions, and a report on the national oral health crisis (https://www.carequest.org/resource-library/uninsured-and-need), plus an article about collaboration with dental hygienists (https://www.aegisdentalnetwork.com/idt/2023/10/who-takes-care-of-your-work) and a free on-demand webinar on 3D printing dentures (https://idt.cdeworld.com/webinars/22920).
IDT Weekly
9/25/2023 - S5 E39
An interview with Voices From the Bench co-hosts Elvis Dahl and Barbara Warner, CDT.
IDT Weekly
9/18/2023 - S5 E38
Updates on Robert Kreyer, CDT; the National Board for Certification in Dental Laboratory Technology (nbccert.org); and Benco Dental; plus, a CE article on obturators from Dennis Urban, CDT (https://idt.cdeworld.com/courses/5400-successful-obturator-solutions).
IDT Weekly
9/11/2023 - S5 E37
Updates on NADL awards nominations (aegisdentalnetwork.com/go/nadlawards2024), Ackuretta, and Ivoclar, plus a MasterClass on a complex implant case (https://www.aegisdentalnetwork.com/idt/2023/09/redefining-what-is-possible).
IDT Weekly
9/4/2023 - S5 E36
Updates on the Ladies of the Mill, Glidewell, and Stratasys, plus an article on consultation in the dental laboratory (https://www.aegisdentalnetwork.com/idt/2023/09/turning-wisdom-into-value).
IDT Weekly
8/28/23 - S5 E35
Updates on Amann Girrbach, Desktop Health, and Dentsply Sirona, plus columns from Jennifer Wheatley (https://www.aegisdentalnetwork.com/idt/2023/08/keeping-pace-with-today-s-recruiting-and-retention-trends) and Brian Forman (https://www.aegisdentalnetwork.com/idt/2023/08/finding-strength-in-employee-engagement).
IDT Weekly
8/21/23 - S5 E34
Updates on Lithoz, Aurident (aurident.com), and SprintRay, plus management columns from Laura Kelly (https://www.aegisdentalnetwork.com/idt/2023/08/continuing-education-for-business-success) and Keith Miolen, CDT (https://www.aegisdentalnetwork.com/idt/2023/08/avoiding-100-dependence-on-technology).
IDT Weekly
8/14/23 - S5 E33
Updates on exocad, Whip Mix, and the World Symposium on Denturism (nationaldenturist.com), plus a feature on public speaking from Jillian Swafford (https://www.aegisdentalnetwork.com/idt/2023/08/take-your-seat-at-the-table).
IDT Weekly
8/7/23 - S5 E32
Updates on the Race for the Future 9.0 (dentallabfoundation.org), Amann Girrbach, and Ivoclar Academy, plus the annual Business Review (https://www.aegisdentalnetwork.com/idt/2023/08).
IDT Weekly
7/31/23 - S5 E31
Updates on exocad Insights 2024 (https://exocad.com/insights2024), Dentsply Sirona, and an upcoming CE course from Zahn Dental (aegisdentalnetwork.com/go/zahnworkshop823), plus a Q&A on photogrammetry (https://www.aegisdentalnetwork.com/idt/2023/07/efficient-accuracy-for-implants).
IDT Weekly
7/24/23 - S5 E30
Updates on Ivoclar, Formlabs, and Panthera Dental, plus an article on automation (https://www.aegisdentalnetwork.com/idt/2023/07/automation-helps-everyone).
IDT Weekly
7/17/23 - S5 E29
Updates on VHF, Dentsply Sirona, and MGF, plus an article on artificial intelligence (https://www.aegisdentalnetwork.com/idt/2023/07/what-is-the-future-of-ai-in-dental-laboratories).
IDT Weekly
7/10/23 - S5 E28
Updates on Ivoclar, Roland DGA, and Dentsply Sirona, plus a MasterClass on 3D printed dentures (https://www.aegisdentalnetwork.com/idt/2023/07/eliminating-variables-for-successful-denture-outcomes).
IDT Weekly
7/3/23 - S5 E27
Updates on a ranking of celebrity smiles (https://www.aegisdentalnetwork.com/news/2023/05/26/top-10-most-attractive-celebrity-smiles-ranked-in-new-study), a partnership between VHF and Nowak Dental Supplies, and the Area Dental Laboratory Symposium, plus IDT’s 2023 Tech Issue (https://www.aegisdentalnetwork.com/idt/2023/07). Subscribe for free at insidedentaltech.com/subscribe!
IDT Weekly
6/26/23 - S5 E26
Updates on Leixir Dental group, Glidewell, and Ivoclar, plus an article from Dr. Michael Scherer on 3D printing (https://www.aegisdentalnetwork.com/idt/2023/06/evolving-hardware-makes-more-possible).
IDT Weekly
6/19/23 - S5 E25
Updates on the Foundation for Dental Laboratory Technology (dentallabfoundation.org/race-for-the-future), VHF, and SprintRay, plus a CE article on audits (https://idt.cdeworld.com/courses/5390-using-an-audit-to-improve-safety-and-quality-performance).
IDT Weekly
6/12/23 - S5 E24
Updates on AACD awards, Dentsply Sirona World (https://www.dentsplysirona.com/en-us/lp/ds-world.html), and Delta Dental’s 2023 State of America’s Oral Health and Wellness Report (https://www.deltadental.com/us/en/state-of-americas-oral-health-report.html), plus a MasterClass on digital dentures (https://www.aegisdentalnetwork.com/idt/2023/06/streamlined-denture-design-and-fabrication-utilizing-a-3d-printing-workflow).
IDT Weekly
6/5/23 - S5 E23
Updates on the IDT Live Digital Dentistry Symposium (idtlive.cdeworld.com), the AACD’s Scientific Session, and the FDLA’s Southern States Symposium and Expo (fdla.net), plus a feature on gender opportunity in the profession (https://www.aegisdentalnetwork.com/idt/2023/06/balancing-the-scales).
IDT Weekly
5/29/23 - S5 E22
Updates on Spear Education, DGSHAPE, and the Panthera Master Cup (aegisdentalnetwork.com/go/mastercup2023), plus a showcase of millable materials (https://lsc-pagepro.mydigitalpublication.com/publication/?m=14255&i=790029&p=27&pp=1&ver=html5).
IDT Weekly
5/22/23 - S5 E21
Updates on the Queens – Women in the Industry event (queenswomenintheindustry.com), Lithoz, and Ivoclar Academy (https://www.ivoclar.com/en_us/academy/learning-opportunities), plus a MasterClass on bonded single-wing zirconia bridges (https://www.aegisdentalnetwork.com/idt/2023/05/the-bonded-single-wing-zirconia-bridge-1).
IDT Weekly
5/15/23 - S5 E20
Updates on partnership between VHF and DSD and Stratasys and VITA, plus a new product from Pac-Dent and an article on millable materials (https://www.aegisdentalnetwork.com/idt/2023/05/more-esthetic-options-help-increase-efficiency).
IDT Weekly
5/8/23 - S5 E19
Updates on the World Symposium on Denturism (nationaldenturist.com), a new direct print aligner workflow, and a master series with Jed Archibald, CDT (https://www.ivoclar.com/en_us/course/esthetic-master-series-achieving-extraordinary-outcomes/143288), plus a CE article on screw-retained implant restorations with angulated channels (https://idt.cdeworld.com/courses/5386-screw-retained-implant-restorations-with-angulated-channels).
IDT Weekly
5/1/23 - S5 E18
Updates on Ivoclar leadership, a new dental AI manufacturer, and MillBox Academy courses (bit.ly/millbox-training), plus a cover story on the critical labor shortage (https://www.aegisdentalnetwork.com/idt/2023/05/managing-critical-labor-shortages).
IDT Weekly
4/24/23 - S5 E17
Updates on the CDS Midwinter Meeting, the AACD, and Candulor’s KunstZahnWerk competition (https://www.aegisdentalnetwork.com/news/2023/03/29/candulor-kunstzahnwerk-competition-the-award), plus a collaborative article about a staged treatment for worn dentition (https://www.aegisdentalnetwork.com/idt/2023/04/innovative-staged-treatment-of-a-worn-dentition).
IDT Weekly
4/17/23 - S5 E16
Updates on Dentsply Sirona (dentsplysirona.com), exocad, and VHF, plus an article on custom implant abutments and bars (https://www.aegisdentalnetwork.com/idt/2023/04/smart-partnerships-for-implant-prosthetics).
IDT Weekly
4/10/23 - S5 E15
Updates on Ivoclar (ivoclar.com/100years), a new CareQuest Institute white paper (https://www.carequest.org/resource-library/american-indian-and-alaska-native-communities-face-disproportionate-burden-oral), and VHF, plus a CE article on OSA therapies for edentulous and elderly patients (https://idt.cdeworld.com/courses/5382-obstructive-sleep-apnea-therapies-for-edentulous-and-elderly-patients).
IDT Weekly
4/3/23 - S5 E14
Updates on a new printable lithium disilicate, the FDLA’s Southern States Symposium & Expo (https://www.fdla.net/symposium), and a partnership between Dtg3d and GuideMia, plus a feature on technicians giving back (https://www.aegisdentalnetwork.com/idt/2023/04/giving-back-1).
IDT Weekly
3/27/23 - S5 E13
Updates on Dentsply Sirona, Strategy Milling, and Formlabs, plus expert Q&As on glass-ceramics (https://www.aegisdentalnetwork.com/idt/2023/03/the-esthetic-option-anyone-can-bond), high-performance polymers (https://www.aegisdentalnetwork.com/idt/2023/03/an-esthetic-alternative-for-substructures), and full-arch zirconia (https://www.aegisdentalnetwork.com/idt/2023/03/predictable-exceptional-esthetics-with-durability).
IDT Weekly
3/20/23 - S5 E12
Updates on exocad, a collaboration between VHF and Ivoclar, and the Washington State Dental Laboratory Association, plus a feature on material selection (https://www.aegisdentalnetwork.com/idt/2023/03/the-what-where-and-why).
IDT Weekly
3/13/23 - S5 E11
Updates on DLT Training and Education (dlttraining.com), a partnership between Roland DGA and HASS Bio America, and exocad, plus IDT’s inaugural Restorative Materials Issue (https://www.aegisdentalnetwork.com/idt/2023/03).
IDT Weekly
02/27/23 - S5 E9
Updates on Roland DGA, exocad (shop.exocad.com), and 3D Systems, plus a CE article on digital full-mouth reconstruction (https://idt.cdeworld.com/courses/5373-digital-full-mouth-reconstruction).
IDT Weekly
2/20/23 - S5 E8
Updates on Stratasys, Amann Girrbach (splatkinder.org), and Zimbis, plus an article on scanning (https://www.aegisdentalnetwork.com/idt/2023/02/scanning-accurately-and-efficiently).
IDT Weekly
2/13/23 - S5 E7
Updates on Carbon, Dentsply Sirona, and the NADL (nadl.org/news/#n2636), plus a MasterClass on implants (https://www.aegisdentalnetwork.com/idt/2023/02/improving-screw-retained-prosthetics-with-elimination-of-ti-bases).
IDT Weekly
2/6/23 - S5 E6
Updates on Ivoclar, Dentsply Sirona, and Panthera Dental, plus a cover story on the 3D printing revolution (https://www.aegisdentalnetwork.com/idt/2023/02/the-3d-printing-revolution).
IDT Weekly
1/30/23 - S5 E5
Updates on Town & Country Dental Studios, Roland DGA, and Ackuretta, plus a MasterClass on custom healing abutment fabrication (https://www.aegisdentalnetwork.com/idt/2023/01/custom-healing-abutment-fabrication-using-extracted-teeth-1).
IDT Weekly
1/23/23 - S5 E4
Updates on Beth Collington, VITA North America, and Ivoclar (ivoclar.com/100years), plus a showcase of printable materials (https://lsc-pagepro.mydigitalpublication.com/publication/?m=14255&i=775829&p=28&ver=html5).
IDT Weekly
1/16/23 - S5 E3
Updates on the NADL’s Vision 21 meeting, Panthera Dental, and Dentsply Sirona, plus a TechEdge article on 3D printable materials (https://www.aegisdentalnetwork.com/idt/2023/01/a-new-era-is-upon-us).
IDT Weekly
1/9/23 - S5 E2
Updates on Dentsply Sirona’s award-winning Primeprint film (https://www.youtube.com/watch?v=luNlToiA4uI) and Amann Girrbach’s Chicago motto (insidedentaltech.com/idtagconnect), plus a cover story on history shaping the future (https://www.aegisdentalnetwork.com/idt/2023/01/how-history-is-shaping-the-future) and an exclusive online MasterClass on implants (https://www.aegisdentalnetwork.com/idt/2023/01/custom-healing-abutment-fabrication-using-extracted-teeth-1).
IDT Weekly
1/2/23 - S5 E1
Updates on Carequest’s One Hundred Million Mouths campaign and the AACD’s 2023 meeting (aacdconference.com), plus a CE article on digital technologies for telescopic and clinical cases (https://idt.cdeworld.com/courses/5368-how-digital-technologies-enhance-telescopic-and-conical-clinical-case-workflows) and an exclusive interview with Doug Statham (https://www.aegisdentalnetwork.com/idt/2022/12/keysplint-family-the-resins-you-know-and-love-now-available-in-clear).
IDT Weekly
12/26/22 - S4 E52
Updates on the TEREC Group and the NADL (https://www.youtube.com/watch?v=M48WGcTnOxA&feature=youtu.be), plus an article on furnaces (https://www.aegisdentalnetwork.com/idt/2022/12/understand-your-ovens), and the new season of IDT’s Product Talk (https://www.aegisdentalnetwork.com/tv/idt-product-talk).
IDT Weekly
12/19/22 - S4 E51
Updates on the NADL’s Vision 21 meeting (https://nadl.org/events/v21/2023/) and a new addition to Dentsply Sirona’s leadership team, plus a collaborative MasterClass co-authored by Alexander Wünsche (https://www.aegisdentalnetwork.com/idt/2022/12/digital-smile-design-and-fabrication-of-cad-cam-restorations-in-a-complex-esthetic-case-1) and an exclusive online Viewpoint with Doug Statham of Keystone Industries (insidedentaltech.com/idtdougstatham).
IDT Weekly
12/12/22 - S4 E50
Updates on Jack Marrano, CDT, and Modern Clear, plus a CE article on regulatory considerations for 3D printing (https://idt.cdeworld.com/courses/5366-assessing-the-chemical-hazards-associated-with-3d-printing) and our online Product iNavigator (https://www.aegisdentalnetwork.com/idt/2022/11).
IDT Weekly
12/5/22 - S4 E49
Updates on Ivoclar and Panthera Dental, plus our annual Trends in Dentistry feature (https://www.aegisdentalnetwork.com/idt/2022/12/trends-in-dentistry-2022-1) and the IDT Tech Extra: Digital Dentures digital magazine (https://www.aegisdentalnetwork.com/idt/special-issues/2022/10/digital-edition).
IDT Weekly
11/28/22 - S4 E48
Updates on the Greater New York Dental Meeting and a partnership between Leixir Dental Group and Dental Whale, plus our Shop-and-Compare charts for materials (insidedentaltech.com/2022/11) and two new episodes of IDT’s Product Talk (https://www.aegisdentalnetwork.com/tv/idt-product-talk).
IDT Weekly
11/21/22 - S4 E47
Updates on the NADL’s Vision 21 meeting (https://nadl.org/events/v21/2023/) and Creation Willi Geller North America, plus the Shop-and-Compare charts in our annual Product iNavigator (insidedentaltech.com/2022/11) and the online exclusive chart for outsourcing (insidedentaltech.com/2022/11/shop-and-compare-outsourcing-1).
IDT Weekly
11/14/22 - S4 E46
Updates on the Greater New York Dental Meeting (gnydm.com) and Amann Girrbach, plus our Game-Changing Products feature (https://lsc-pagepro.mydigitalpublication.com/publication/?m=14255&i=766038&p=82&pp=1&ver=html5) and sintering furnace charts (https://lsc-pagepro.mydigitalpublication.com/publication/?m=14255&i=766038&p=78&pp=1&ver=html5).
IDT Weekly
11/7/22 - S4 E45
Updates on the SCDLA (jim@mortondentalcrafts.com) and Ivoclar, plus the 2022 Product iNavigator ad exclusive online expanded charts (insidedentaltech.com/2022/11).
IDT Weekly
10/31/22 - S4 E44
Updates on the exocad Insights 2022 event (insidedentaltech.com/idtexocad2022recap) and Henry Schein, plus a showcase of digital denture products (https://www.aegisdentalnetwork.com/idt/2022/10/showcase-of-digital-dentures-1) and new episodes of IDT’s Product Talk (https://www.aegisdentalnetwork.com/tv/idt-product-talk).
IDT Weekly
10/24/22 - S4 E43
Updates on the Foundation Nakao for Worldwide Oral Health (foundation-nakao.com/applications) and Carbon, plus a CE article on ceramics (https://idt.cdeworld.com/courses/5358-a-crash-course-in-dental-ceramics) and a video interview with Tom Wiand, CDT (https://www.aegisdentalnetwork.com/idt/videos/tom-wiand-ivotion-denture-system-ivoclar).
IDT Weekly
10/17/22 - S4 E42
Updates on the Whip Mix Digital Forum (https://www.whipmix.com/special-events/2022-digital-forum/) and Dentsply Sirona, plus a MasterClass on advanced milling strategies for partial dentures (https://www.aegisdentalnetwork.com/idt/2022/10/advanced-milling-strategies) and an IDT Tech Extra video featuring Tom Wiand, CDT (insidedentaltech.com/idtivotionwiand).
IDT Weekly
10/10/22 - S4 E41
Updates on a Zahn Dental 3D printing roadshow (insidedentaltech.com/idtzahnroadshow2022) and Ivoclar’s new Supervisory Board member, plus a TechEdge article on digital dentures (https://www.aegisdentalnetwork.com/idt/2022/10/creating-your-ideal-workflow) and the latest issue of the online supplement IDT Tech Extra (https://lsc-pagepro.mydigitalpublication.com/publication/?i=763177).
IDT Weekly
10/3/22 - S4 E40
Updates on dental therapy (insidedentaltech.com/idt2022dentaltherapy), VHF, and Roland, plus a CE article on communication for full-arch implant-supported prostheses (https://idt.cdeworld.com/courses/5354-communication-or-full-arch-implant-supported-prostheses).
IDT Weekly
9/26/22 - S4 E39
Updates on Dentsply Sirona returning to IDS and Henry Schein acquiring Midway Dental Supply, plus a TechEdge article on intraoral scanning (https://www.aegisdentalnetwork.com/idt/2022/09/quality-and-cost-savings-for-the-laboratory) and a free on-demand webinar with Minh Tran (insidedentaltech.com/idt3shapetran).
IDT Weekly
9/19/22 - S4 E38
Updates on Dentsply Sirona and exocad, plus a MasterClass about a custom software providing flexibility for denture design (https://www.aegisdentalnetwork.com/idt/2022/09/flexibility-in-cad-cam-denture-design), plus a Viewpoint Q&A with Ed Hafkey and Sean Sexton of Sagemax (insidedentaltech.com/idtsagemax22).
IDT Weekly
9/12/22 - S4 E37
Updates on dental therapy (https://insidedentaltech.com/idt2022dentaltherapy), VHF, and Roland DG, plus a CE article on communication between laboratories and dentists (https://idt.cdeworld.com/courses/5354-communication-or-full-arch-implant-supported-prostheses).
IDT Weekly
9/5/22 - S4 E36
Updates on National Dentex and 3M, plus a cover story on expanding laboratories’ reach beyond the local area (https://www.aegisdentalnetwork.com/idt/2022/09/think-bigger) and a free live webinar on digital denture design (https://cdeworld.com/webinars/register/22558-outside-the-box-advanced-workflows-for-digital-dentures-using-3shape).
IDT Weekly
8/29/22 - S4 E35
Updates on the Global Formlabs User Summit (summit.formlabs.com), the Nowak Educational 2022 (https://www.eventbrite.com/e/nowak-invitational-2022-tickets-381753905207), and a new hire at Whip Mix, plus marketing articles in the annual Business Review (https://www.aegisdentalnetwork.com/idt/2022/08).
IDT Weekly
8/22/22 - S4 E34
Updates on the Foundation for Dental Laboratory Technology’s Race for the Future 8.0 (dentallabfoundation.org), Keystone Industries’ KeyPrint Day (insidedentaltech.com/idtkeyprintdayfb), and Roland DGA personnel moves, plus HR articles from Jennifer Wheatley (https://www.aegisdentalnetwork.com/idt/2022/08/what-are-your-succession-plans) and Brian Forman (https://www.aegisdentalnetwork.com/idt/2022/08/employee-engagement-is-key).
IDT Weekly
8/15/22 - S4 E33
Updates on a new report on oral health disparities (https://www.carequest.org/content/state-oral-health-equity-america-2022) and an honor for Roland DGA, plus an article about building your laboratory’s value (https://www.aegisdentalnetwork.com/idt/2022/08/build-your-value) and an IDT Tech Extra video interview with Brandon Stapleton, DDS (insidedentaltech.com/videos/brandon-stapleton-whip-mix).
IDT Weekly
8/8/22 - S4 E32
Updates on two Dentsply Sirona executives being honored and Panthera Dental’s Master Cup, plus a posthumously published article by Steve Killian, CDT, on master training systems (https://www.aegisdentalnetwork.com/idt/2022/08/creating-an-sop-quality-control-and-training-master-system), and an IDT Tech Extra video interview with Daniel Alter, MSc, MDT, CDT, and Rick Godair, CDT, TE (https://www.aegisdentalnetwork.com/idt/videos/idt-trusana-zahn-dental).
IDT Weekly
8/1/22 - S4 E31
Updates on exocad Insights 2022 (insidedentaltech.com/idtexocadinsights2022) and a partnership with VOCO American and TeamSmile (teamsmile.org), plus a CE on LEAN manufacturing (https://idt.cdeworld.com/courses/5352) and a CE webinar on denture basics (https://idt.cdeworld.com/webinars/22559).
IDT Weekly
7/25/22 - S4 E30
An interview with Keystone Industries’ Ira Rosenau about KeyPrint Day (cdeworld.com/events/site/keyprint2022), plus an article on CAD/CAM scanning and milling (https://www.aegisdentalnetwork.com/idt/2022/07/the-cutting-edge-of-scanning-and-milling) and an exclusive online supplement (https://lsc-pagepro.mydigitalpublication.com/publication/?i=752191&q=).
IDT Weekly
7/18/22 - S4 E29
Updates on a partnership between Argen and VHF, Nobel Biocare’s portion of the Envista Summit (envistasummitemea.com), and an article on 3D printing hardware (https://www.aegisdentalnetwork.com/idt/2022/07/the-boundless-variety-of-3d-printing-hardware).
IDT Weekly
7/11/22 - S4 E28
Updates on the Race for the Future 8.0 (dentallabfoundation.org/education-day) and Whip Mix, plus an article on a collaborative implant protocol (https://www.aegisdentalnetwork.com/idt/2022/07/plan-and-execute) and a free live CE webinar (https://cdeworld.com/webinars/register/22505).
IDT Weekly
7/4/22 - S4 E27
Updates from the CareQuest Institute for Oral Health (https://www.carequest.org/resource-library/connection-between-oral-health-and-mental-health) and Ivoclar Vivadent, plus an article on 3D printing permanent crowns (https://www.aegisdentalnetwork.com/idt/2022/07/the-printed-crown) and free on-demand CE webinars (insidedentaltech.com/webinars).
IDT Weekly
6/27/22 - S4 E26
Updates on Keystone Industries’ KeyPrint Day (aegisdentalnetwork.com/go/keyprintday) and Aurident’s new arrangement with Asiga, plus an article on 3D printing (https://www.aegisdentalnetwork.com/idt/2022/06/options-abound-on-the-market-for-3d-printers).
Register Now for KeyPrint Day 2022: https://cdeworld.com/events/site/keyprint2022
IDT Weekly
6/20/21 - S4 E25
Updates on Dentsply Sirona World (dentsplysirona.com) and Panthera Dental (pantheradental.com/10th), plus a feature on business acumen (https://www.aegisdentalnetwork.com/idt/2022/06/business-acumen-1) and a webinar on digital dentures (https://cdeworld.com/webinars/register/22456-hot-diggity-dentures).
IDT Weekly
6/13/22 - S4 E24
Updates on National Dentex’s new headquarters and GC’s centennial celebrations, plus a regulatory standards CE and a new episode of IDT’s Product Talk.
IDT Weekly
6/6/2022 - S4 E23
Updates on an abutment-less implant option, a new National Sales Manager for Sterngold Dental, and Dentsply Sirona’s DS Core solution, plus a regulatory standards CE.
IDT Weekly
5/23/22 - S4 E21
Updates on DS World 2022 (dentsplysirona.com) and Candulor’s KunstZahnWerk 2023 competition (candulor.com), plus a CE article on implant-supported prostheses and a live webinar (postponed to June 27: https://cdeworld.com/webinars/register/22456-hot-diggity-dentures).
IDT Weekly
5/16/22 - S4 E20
Remembering IDT Editorial Advisory Board member Steve Killian, CDT.
IDT Weekly
5/9/22 - S4 E19
IDT Weekly
5/2/22 - S4 E18
Updates on the FDLA’s Southern State’s Symposium & Expo and a study about alternative antibiotics for dental implants, plus a cover story on education and a free webinar on digital dentures presented by Whitney McCarty.
IDT Weekly
4/25/22 - S4 E17
Updates on executive personnel moves at Dentsply Sirona and HASS Bio, plus a MasterClass article on prepless veneers and a free on-demand webinar on dentures.
IDT Weekly
4/18/22 - S4 E16
Updates on IDT’s Editorial Advisory Board breakfast, the Ivoclar Group’s sales volume increase, and Amann Girrbach celebrating two anniversaries, plus a TechEdge article on implant abutments and bars.
IDT Weekly
4/11/22 - S4 E15
Updates on certification courses from Deutsch Dental Arts, a new device from Panthera Sleep, and a new 3D printing solution from Dentsply Sirona, plus a CE article on transitional implants for maxillary full-arch reconstruction using transitional implants.
IDT Weekly
4/4/22 - S4 E14
An update on the AID’s Esthetic Implant Symposium, Daniel Alter recaps the Additive Manufacturing Strategies conference, a feature on charitable efforts, and upcoming CE webinars.
IDT Weekly
3/28/22 - S4 E13
Updates on Zahn Dental’s new GM, the DLAT Southwest Conference and Expo, and exocad’s new online shop, plus an article about the latest developments in milling machines.
IDT Weekly
3/21/22 - S4 E12
Updates on a new 3D printing material for permanent crowns, a German laboratory implementing ceramic printing, and the AACD’s 2022 Scientific Session, plus a collaborative MasterClass on anterior esthetics.
IDT Weekly
3/14/22 - S4 E11
Updates on a new 3D printing validation for Trusana, the NADL’s call for Board of Directors applicants, and Dentsply Sirona’s participation in World Oral Health Day, plus a CE article on 3D printing dentures.
IDT Weekly
3/7/22 - S4 E10
Updates on an award for IDT board member Rob Woosley, an agreement between Nexa3D and Nowak Dental Supplies, and the Race for the Future 8.0, plus a cover story on maximizing resources in the laboratory.
IDT Weekly
2/28/22 - S4 E9
Updates on a partnership between Zest Dental Solutions and Aspen Dental, a new website for Roland DGA, and an agreement between VHF and Proto3000, plus a CE article reviewing intraoral scanners.
IDT Weekly
2/21/22 - S4 E8
Updates on a loss for the profession and new additions at Argen and Roland, plus a TechEdge article on desktop scanners.
IDT Weekly
2/14/22 - S4 E7
Updates on Leixir Dental Group, Ivoclar Group, and Overjet, plus an article on the digital centric record technique (https://www.aegisdentalnetwork.com/idt/2022/02/the-digital-centric-record-technique).
IDT Weekly
2/7/22 - S4 E6
Updates on Glidewell’s new CEO, National Dentex’s latest acquisition, and a new CareQuest Institute initiative, plus an article on defining esthetics (https://www.aegisdentalnetwork.com/idt/2022/02/defining-esthetics).
IDT Weekly
1/31/22 - S4 E5
Updates on the global dental laboratories market forecast and a CareQuest Institute whitepaper about access to care (https://www.carequest.org/system/files/CareQuest_Institute_Veteran-Oral-Health.pdf), plus a showcase of 3D printable materials (https://lsc-pagepro.mydigitalpublication.com/publication/?m=14255&i=732538&p=30&pp=1&ver=html5) and a free ebook on next-generation materials (https://www.aegisdentalnetwork.com/idt/ebooks/flexibility-for-the-future-new-resins-broaden-laboratories-material-options).
IDT Weekly
1/24/22 - S4 E4
Updates on Evolution Dental Science and the Dental Trade Alliance, plus an article on 3D printable materials (https://www.aegisdentalnetwork.com/idt/2022/01/evolving-chemistries-expanding-applications) and a webinar on full denture technology (https://cdeworld.com/webinars/22352-excellence-in-full-denture-technology).
IDT Weekly
1/17/22 - S4 E3
Updates on the Dentsply Sirona/3Shape collaboration and the Dental Laboratory Association of Alabama (dlaal.org), plus a cover story on chairside technology (https://www.aegisdentalnetwork.com/idt/2022/01/powers-combined) and Inside Dentistry’s annual Trends event (https://cdeworld.com/webinars/22365).
IDT Weekly
1/10/22 - S4 E2
Updates the Foundation for Dental Laboratory Technology’s Pillar Scholarship (dentallabfoundation.org) and a new member of Dentsply Sirona’s leadership team, plus a CE article on anti-snoring and sleep apnea dental appliances (https://idt.cdeworld.com/courses/5320-anti-snoring-and-sleep-apnea-dental-appliances) and a free CE ebook on full-arch implants from Compendium (https://www.aegisdentalnetwork.com/cced/ebooks/planning-full-arch-reconstructions-for-today-and-tomorrow-implant-overdentures-and-fixed-restorations).
IDT Weekly
1/3/22 - S4 E1
Updates on the NADL’s Vision 21 meeting (https://nadl.org/events/v21/2022/) and Sterngold’s STS, plus a MasterClass on collaborative treatment planning (https://www.aegisdentalnetwork.com/idt/2022/01/decision-making-in-comprehensive-dentistry-1) and an Inside Dentistry Roundtable on cements (https://cdeworld.com/webinars/register/22312-inside-dentistry-s-roundtable-cementation-clarification).
IDT Weekly
12/27/21 - S3 E52
Updates on Desktop Health and the AACD (aacdconference.com), plus an article on sintering furnaces (https://www.aegisdentalnetwork.com/idt/2021/12/making-sintering-more-efficient) and IDT’s Product Talk (https://www.aegisdentalnetwork.com/tv/idt-product-talk).
IDT Weekly
12/20/21 - S3 E51
Updates on the Smart Integration Awards and another acquisition by National Dentex, plus a MasterClass on overdentures (https://www.aegisdentalnetwork.com/idt/2021/12/utilizing-fiber-composite-frameworks-to-reinforce-overdentures) and an upcoming CE webinar on full-arch implantology (https://cdeworld.com/webinars/register/22278-the-evolution-of-full-arch-implantology).
IDT Weekly
12/13/21 - S3 E50
Updates on Argen and a deal between Nobel Biocare and SprintRay, plus a CE article on FDA requirements on Ti bases and blanks (https://idt.cdeworld.com/courses/5316-illuminating-fda-requirements-on-ti-bases-and-blanks), and a free ebook on resins (https://www.aegisdentalnetwork.com/idt/ebooks/flexibility-for-the-future-new-resins-broaden-laboratories-material-options).
IDT Weekly
12/6/21 - S3 E49
Updates on another acquisition by National Dentex and a partnership between 3D DDS and Nexa3D, plus our annual Trends in Dentistry feature (https://www.aegisdentalnetwork.com/idt/2021/12/trends-in-dentistry-2021-1) and the free live CE event “Trends: The Inside Look with Dr. DiTolla and Friends” (https://id.cdeworld.com/events/897).
IDT Weekly
11/29/21 - S3 E48
Updates on the new 3Shape Unite platform and SafeLink Consulting, plus the annual Product iNavigator buyer’s guide (https://www.aegisdentalnetwork.com/idt/2021/11) and an exclusive online Q&A with Medentika’s John Luangrath, CDT (https://www.aegisdentalnetwork.com/idt/2021/09/exceptional-support-for-overdentures).
IDT Weekly
11/22/21 - S3 E47
Updates on Open Implants and National Dentex, plus the 5 Reasons to Buy pages in the annual Product iNavigator (https://www.aegisdentalnetwork.com/idt/2021/11) and a free ebook covering Season 3 of IDT’s Product Talk (https://www.aegisdentalnetwork.com/idt/ebooks/product-talk-bench-observation-discussion-season-3).
IDT Weekly
11/15/21 - S3 E46
A loss for the dental laboratory community, plus an update on Amann Girrbach’s software, the Game-Changing Products section in the Product iNavigator (https://lsc-pagepro.mydigitalpublication.com/publication/?m=14255&i=725944&p=8&ver=html5), and Eli Ganon’s report from the IDS (https://www.aegisdentalnetwork.com/idt/2021/11/ids-recap-ai-platforms-abound).
IDT Weekly
11/8/21 - S3 E45
Updates on a collaboration between Keystone Industries and Carbon and an award for Medit’s i700 intraoral scanner, plus our Product iNavigator Shop-and-Compare Charts (https://lsc-pagepro.mydigitalpublication.com/publication/?m=14255&i=725944&p=14&ver=html5) and 12 on-demand webinars from the 2021 IDT International Digital Denture Symposium (https://cdeworld.com/events/site/idds2021/library).
IDT Weekly
11/1/21 - S3 E44
Updates on Ivoclar Vivadent’s Dental Innovation Tour (dentalinnovationtour.com), plus the annual Product iNavigator buyer’s guide (https://www.aegisdentalnetwork.com/idt/2021/11) and the latest season of IDT’s Product Talk (https://www.aegisdentalnetwork.com/tv/idt-product-talk/episodes).
IDT Weekly
10/25/21 - S3 E43
Updates on Dentsply Sirona World and an agreement between Kuraray Noritake and B&D Dental, plus an article from Mark Samuel Chan, DD, on digital dentures (https://www.aegisdentalnetwork.com/idt/2021/10/the-rapid-pace-of-progress), and IDT’s Product Talk featuring Minh Tran discussing Keystone Industries’ KeySplint Hard (https://www.aegisdentalnetwork.com/tv/idt-product-talk/idt-pt-7).
IDT Weekly
10/18/21 - S3 E42
Updates on AvaDent and Formlabs, plus a collaborative MasterClass on partial dentures (https://www.aegisdentalnetwork.com/idt/2021/10/a-novel-minimally-invasive-approach-to-replacing-missing-teeth) and a Product Talk episode featuring Cody Iverson, CDT, discussing Kulzer’s cara Print 4.0 (https://www.aegisdentalnetwork.com/tv/idt-product-talk/idt-pt-8).
IDT Weekly
10/11/21 - S3 E41
Updates on Zimmer Biomet’s planned spinoff of its dental business and a partnership between Ackuretta and Bego, plus a CE articles on framework design for maxillary over dentures (https://idt.cdeworld.com/courses/5311-framework-design-fundamentals-for-maxillary-overdentures) and a new episode of IDT’s Product Talk featuring BJ Kowalski discussing Dentsply Sirona’s Lucitone Digital Print (https://www.aegisdentalnetwork.com/tv/idt-product-talk/idt-pt-6).
IDT Weekly
10/4/21 - S3 E40
Updates on Ivoclar Vivadent’s Dental Innovation Tour (dentalinnovationtour.com), plus a cover story about adding value for your clients (https://www.aegisdentalnetwork.com/idt/2021/10/show-your-worth) and a free on-demand webinar on digital dentures (https://www.aegisdentalnetwork.com/idt/webinars).
IDT Weekly
9/27/21 - S3 E39
Updates on the Foundation for Dental Laboratory Technology (dentallabfoundation.org/scholsrshipsgrants) and Overjet, plus a CE article on optical behavior of zirconia in the esthetic zone (https://idt.cdeworld.com/courses/5305-optical-behaviors-of-zirconia-based-restorations-over-teeth-and-implants-in-the-esthetic-zone), and an on-demand webinar on impression taking for dentures (https://www.aegisdentalnetwork.com/idt/webinars).
IDT Weekly
9/20/21 - S3 E38
Updates on the IDT International Digital Denture Symposium (idds.cdeworld.com) and Desktop Health, plus a TechEdge article by Jeff Plumlee on intraoral scanning, and an exclusive video with Gary Severance, DDS, previewing his symposium lecture (https://www.aegisdentalnetwork.com/idt/videos/ddi-severance).
IDT Weekly
9/13/21 - S3 E37
Updates Elvis Dahl, Preat, and Sterngold (http://sterngold.com/courses), plus a MasterClass by Germen Versteeg on digital dentures (https://www.aegisdentalnetwork.com/idt/2021/09/utilizing-intraoral-scanning-and-digital-design-for-implant-based-overdentures) and an exclusive video with Joseph J. Massad, DDS (https://www.aegisdentalnetwork.com/idt/videos/ddi-massad).
IDT Weekly
9/6/2021 - S3 E36
Updates the IDT International Digital Denture Symposium (idds.cdeworld.com) and Amann Girrbach, plus a feature article on the fundamentals of dentures (https://www.aegisdentalnetwork.com/idt/2021/09/the-basics-still-matter) and an exclusive video interview with Alexander Bendayan, DDS, CAGS, FICD (https://www.aegisdentalnetwork.com/idt/videos/ddi-bendayan).
IDT Weekly
8/30/2021 - S3 E35
Updates on Patterson Dental and Amann Girrbach, plus a roundup of columns from IDT's 2021 Business Review (https://www.aegisdentalnetwork.com/idt/2021/08/)and a video interview with M. Reed Cone, DMD, MS, CDT (https://www.aegisdentalnetwork.com/idt/videos/ddi-cone).
IDT Weekly
8/23/2021 - S3 E34
An update on Ivoclar Vivadent’s Dental Innovation Tour (dentalinnovationtour.com), plus an article about venture capitalist perspectives (https://www.aegisdentalnetwork.com/idt/2021/08/follow-the-money-venture-capitalist-perspectives) and an exclusive Viewpoint with Sterngold Dental’s Gordon Craig (https://www.aegisdentalnetwork.com/idt/2021/08/empowering-laboratories-to-win-more-business).
IDT Weekly
8/16/2021 - S3 E33
Updates on the Race for the Future 7.0 (dentallabfoundation.org) and 3M’s new aligner system, plus an article on teledentistry for dentures (https://www.aegisdentalnetwork.com/idt/2021/08/teledentistry-for-dentures) and an exclusive video interview with Andrew Johnson, DDS, MDS, CDT (https://www.aegisdentalnetwork.com/idt/videos/ddi-johnson), previewing his lecture at the IDT International Digital Denture Symposium (idds.cdeworld.com).
IDT Weekly
8/9/2021 - S3 E32
Updates on exocad and the Fun ’N Sun Weekend, plus an article on going directly to the consumer with night guards (https://www.aegisdentalnetwork.com/idt/2021/08/going-directly-to-the-consumer), and an exclusive video interview with Stephen F. Balshi, MBE (https://www.aegisdentalnetwork.com/idt/videos/ddi-balshi).
IDT Weekly
8/2/2021 - S3 E31
Updates on the IDT International Digital Denture Symposium (idds.cdeworld.com) and Ivoclar Vivadent, plus a feature on personalized service (https://www.aegisdentalnetwork.com/idt/2021/08/personalized-service) and an exclusive article about Persyst Enterprises’ machine for recycling isopropyl alcohol used for 3D printing (https://www.aegisdentalnetwork.com/idt/2021/08/massive-roi-green-benefits-when-recycling-ipa-with-persysts-sidewinder-model-m-2).
IDT Weekly
7/26/2021 - S3 E30
Updates on the IDT International Digital Denture Symposium (idds.cdeworld.com) and DGSHAPE, plus the product showcase from our annual Tech Issue (https://lsc-pagepro.mydigitalpublication.com/publication/?i=712559&ver=html5&p=32) and an episode of Inside Dentistry's Roundtable on implant (https://www.aegisdentalnetwork.com/tv/inside-dentistry-roundtable/s4e3/).
IDT Weekly
7/19/2021 - S3 E29
Updates on Ivoclar Vivadent’s Dental Innovation Tour (dentalinnovationtour.com) and Keystone Industries’ KeyGuide being validated for the Carbon 3D printing platform, plus an article about cybersecurity (https://www.aegisdentalnetwork.com/idt/2021/07/be-cybersmart-in-protecting-patient-data) and an on-demand video about indirect materials selection from Inside Dentistry (https://id.cdeworld.com/webinars/22071-clinical-series-indirect-materials-selection).
IDT Weekly
7/12/2021 - S3 E28
Updates on the IDT International Digital Denture Symposium (idds.cdeworld.com) and exocad, plus IDT’s annual Tech Issue (https://www.aegisdentalnetwork.com/idt/2021/07/) and the latest episode of IDT’s Product Talk (https://www.aegisdentalnetwork.com/tv/idt-product-talk/idt-pt-5/).
IDT Weekly
7/5/2021 - S3 E27
Updates on a collaboration between Dentsply Sirona and 3Shape, and a new zirconia shade guide from Glidewell, plus a CE article on 3D extraoral facial scanning (insidedentaltech.com/2021/06/3d-extraoral-facial-scanning) and an exclusive Q&A with Steve Kauffman of Zimmer Biomet (https://www.aegisdentalnetwork.com/idt/2021/06/realguide-makes-surgical-guides-easier-and-more-accessible).
IDT Weekly
6/28/2021 - S3 E26
Updates on the IDT International Digital Denture Symposium (idds.cdeworld.com) and Desktop Health’s new Flexcera material (fleecer.com), plus an article about cementation and bonding (https://www.aegisdentalnetwork.com/idt/2021/06/an-uncommon-bond) and an exclusive video interview with Tom Daulton of NDX (https://www.aegisdentalnetwork.com/idt/videos/tom-daulton/).
IDT Weekly
6/21/2021 - S3 E25
An interview with Nelson Rego, CDT, from Ivoclar Vivadent’s Dental Innovation Tour stop in the Los Angeles area (dentalinnovationtour.com), plus an article by Jessica Birrell, CDT, on 3D printing (https://www.aegisdentalnetwork.com/idt/2021/06/high-end-3d-printing-becomes-affordable) and an exclusive Q&A with Michael Mazen Jafar of Desktop Health (https://www.aegisdentalnetwork.com/idt/2021/06/qa-with-michael-mazen-jafar-of-desktop-health).
IDT Weekly
6/14/2021 - S3 E24
Updates on the National Denturist Association’s Annual Conference (nationaldenturist.com) and VHF’s executive team, plus a MasterClass about providing a screw-free fixed hybrid prosthesis (https://www.aegisdentalnetwork.com/idt/2021/06/a-screw-free-fixed-hybrid-prosthesis-in-two-visits) and an extended showcase of 3D printers (https://lsc-pagepro.mydigitalpublication.com/publication/?m=14255&i=708292&p=26&pp=1).
IDT Weekly
6/7/2021 - S3 E23
Updates on awards from the NADL and NBC and the upcoming FDLA Southern States Symposium & Expo (fdla.net), plus a CE article on FDA regulations involving orthodontic aligners (https://idt.cdeworld.com/courses/22087-fda-regulations-involving-orthodontic-aligners) and a new episode of IDT’s Product Talk featuring Besmile’s Aconia zirconia (aegistv.com/idt-product-talk/idt-pt-5).
IDT Weekly
5/31/2021 - S3 E22
Updates on the IDT International Digital Denture Symposium (idds.cdeworld.com) and a partnership between Prodways and Oqton, plus a column by Daniel Alter, MSc, MDT, CDT, on artificial intelligence (https://www.aegisdentalnetwork.com/idt/2021/05/artificial-intelligence-in-dentistry) and a free ebook on zirconia cementation (https://www.aegisdentalnetwork.com/id/ebooks/liberal-or-conservative-taking-the-politics-out-of-zirconia-cementation).
IDT Weekly
5/24/2021 - S3 E21
Updates on the IDT International Digital Denture Symposium (idds.cdeworld.com) and a big donation to the Dental Lifeline Network, plus an article on millable materials by Alexander Wunsche (https://www.aegisdentalnetwork.com/idt/2021/05/esthetics-function-and-efficiency) and an exclusive video interview with Michael D. Scherer, DMD, MS, about processing over dentures (https://www.aegisdentalnetwork.com/idt/videos/m-scherer).
IDT Weekly
5/17/2021 - S3 E20
Updates on Dentsply Sirona’s Smart Integration Awards (dentsplysirona.com/smart-integration-award) and Triad Dental Consultants, plus a MasterClass on digital dentures by Andrew Johnson, DDS, MDS, CDT, and a live CE webinar on over denture attachments (insidedentaltech.com/idt52421webinar).
IDT Weekly
5/10/21 - S3 E19
Updates on Ivoclar Vivadent’s Dental Innovation Tour (dentalinnovationtour.com) and Alien Milling, plus a CE article on implant over dentures and a live CE webinar (insidedentaltech.com/idt51021webinar).
IDT Weekly
4/26/21 - S3 E17
An interview with Ivoclar Vivadent's Don Bell about the Dental Innovation Tour, plus a column on 3D printing human bone and a live webinar on dentures (https://cdeworld.com/webinars/register/22030-seamless-collaboration-between-dentists-and-lab-technicians-as-the-foundation-for-successful-dentures).
IDT Weekly
4/19/21 - S3 E16
Updates on Amann Girrbach and new programs from the NADL, plus a TechEdge article on implant abutments and bars, and an exclusive extended showcase online (https://lsc-pagepro.mydigitalpublication.com/publication/?m=14255&i=701211&p=26&pp=1).
IDT Weekly
4/12/21 - S3 E15
Updates on the Foundation for Dental Laboratory Technology’s Race for the Future 7.0 and a collaboration on printing ceramic implants, plus a MasterClass on facial analysis for full-mouth rehabilitation, and Season 2 of IDT’s Product Talk.
IDT Weekly
3/29/21 - S3 E13
Updates on AG Live Con and the NADL’s Vision 21 meeting, plus a column on 3D printing orthodontic brackets, and a free webinar on digital dentures.
IDT Weekly
3/22/21 - S3 E12
Updates on a 3D printed permanent crown for SprintRay printers and Zimmer Biomet spinning off its dental business, plus a cover story on implants and an exclusive online extended showcase of CAM milling machines.
IDT Weekly
3/15/21 - S3 E11
Updates on the Diverse Dental Society and Keating Dental Lab, plus a CE article on hybrid removable prostheses and a free ebook about season 2 of IDT’s Product Talk.
IDT Weekly
3/8/21 - S3 E10
Updates on the DLAT and Zahn Dental’s distribution agreement for DESS Dental Smart Solutions, plus a TechEdge article about milling machines, and an exclusive Tech Insider video interview with Stephen Wagner, DDS, about digital denture workflows (insidedentaltech.com/idt1243).
IDT Weekly
3/1/21 - S3 E9
Updates on a live streaming event from Penn Dental Medicine and Compendium (cdeworld.com/go/penncompendium), and a collaboration between Keystone Industries and Nexa3D, plus a MasterClass about collaborating on an esthetic veneers case, and a free ebook on digital dentures.
IDT Weekly
2/22/21 - S3 E8
Updates on the Dental AI Council and an ACP Innovation Award, plus a CE article on anterior crown materials, and our entire library of CE content (idt.cdeworld.com).
IDT Weekly
2/15/21 - S3 E7
Updates on new accredited members of the AACD and a partnership between Medit and Straumann, plus an article on the latest developments in desktop scanners, and the IDT International Digital Denture Symposium webinar series (https://cdeworld.com/events/site/idds/library/).
IDT Weekly
2/8/21 - S3 E6
Updates on IDS 2021 and Stratasys’ acquisition of Origin, plus a MasterClass about interdisciplinary treatment and an on-demand webinar on digital dentures (https://cdeworld.com/events/site/idds/library/).
IDT Weekly
2/1/21 - S3 E5
Updates on California dentists administering COVID-19 vaccines and EnvisionTEC being acquired, plus a cover story on virtual communication and the latest episode of IDT’s Product Talk (https://www.aegisdentalnetwork.com/tv/idt-product-talk/idt-pt-4/).
IDT Weekly
1/25/21 - S3 E4
Updates on Carbon’s Joseph DeSimone and a new hire for Aurident, plus an article on 3D printing materials and an exclusive video interview with Josef Kolbeck (insidedentaltech.com/idt1238).
IDT Weekly
1/18/21 - S3 E3
Updates on 3D printed permanent crowns and new machines authorized for IPS e.max, plus a CE article on emergence profile and the ID Trends in Dentistry webinar (aegisdentalnetwork.com/id/webinars/232).
IDT Weekly
1/11/21 - S3 E2
Updates on VHF and Dr. Michael Scherer, plus a MasterClass by Josef Kolbeck on using the Golden Proportion for complete dentures, and an on-demand webinar on 3D printing (https://www.aegisdentalnetwork.com/idt/webinars/226).
IDT Weekly
1/4/2021 - S3 E1
Updates on Ottawa Dental Laboratory and exocad, plus our cover story “The Great Restart” about operating laboratories during and after the pandemic, and an exclusive video interview with Tom Daulton (https://www.aegisdentalnetwork.com/idt/videos/idt-tom-daulton).
IDT Weekly
12/28/20 - S2 E52
Updates on a collaboration between Dentsply Sirona and Panthera and DSG’s new podcast, plus a TechEdge article on sintering furnaces, and the IDT International Digital Denture Symposium Webinar Series (https://cdeworld.com/events/site/idds/library/).
IDT Weekly
12/21/20 - S2 E51
Updates on the International Dental Show and Keating Dental Lab, plus a MasterClass about team collaboration for a fixed, implant-retained full-arch prosthesis, and an exclusive video interview with Mary A. Bartlett (https://www.aegisdentalnetwork.com/idt/videos/idt-extra-bartlett).
IDT Weekly
12/14/20 - S2 E50
Updates on the NADL’s Vision 21 meeting and Aspen Dental Management Inc., plus a CE article on infection control, and the IDT International Digital Denture Symposium webinar series (https://cdeworld.com/events/site/idds/library/).
IDT Weekly
12/7/20 - S2 E49
Updates on Preat Corporation and Dentsply Sirona World, plus an article on clinical trends and the IDT International Digital Denture Symposium webinar series (https://cdeworld.com/events/site/idds/library/).
IDT Weekly
11/30/20 - S2 E48
Updates National Dentex Labs and the Dawson Academy, plus highlights from the annual Product iNavigator and the IDT International Digital Denture Symposium webinar series (https://cdeworld.com/events/site/idds/library/).
IDT Weekly
11/23/20 - S2 E47
Updates on the Santa Fe Group and a study about patient aggression, plus our Shop-and-Compare charts for materials and the latest installment in the IDT International Digital Denture Symposium webinar series (https://cdeworld.com/events/site/idds/library/).
IDT Weekly
11/16/20 - S2 E46
Updates on the IDS and Structo, plus Product iNavigator Shop-and-Compare charts in print and online (insidedentaltech.com/idt2020outsourcingchart and insidedentaltech.com/idt2020sinteringchart).
IDT Weekly
11/9/20 - S2 E45
Updates on the Eastern Conference and DSG, plus our Game-Changing Products and a live webcast on trends in dentistry.
IDT Weekly
11/2/20 - S2 E44
Updates on COVID-19’s impact on dentistry and the new Dental AI Council, plus the 2020 IDT Product iNavigator and the IDT International Digital Denture Symposium webinar series (https://cdeworld.com/events/site/idds/).
IDT Weekly
10/26/20 - S2 E43
Updates on the Greater New York Dental Meeting and an award for Dental Wings, plus a cover story on multidisciplinary collaboration and the IDT International Digital Denture Symposium webinar series (https://cdeworld.com/events/site/idds/).
IDT Weekly
10/19/20 - S2 E42
Updates on exocad Insights and Medit’s new product release, plus a CE article by William Baum, CDT, on verification jigs, and the IDT International Digital Denture Symposium webinar series (https://cdeworld.com/events/site/idds/).
IDT Weekly
10/12/20 - S2 E41
Updates on the IDT International Digital Denture Symposium and “The Quality of Esthetics,” plus an article on digital dentures by Mark Williamson, CDT, and the latest installments in the IDT International Digital Denture Symposium webinar series.
IDT Weekly
10/5/20 - S2 E40
Updates on charitable efforts by Whip Mix and the AACD’s 2021 meeting, plus a MasterClass about feldspathic veneers and an exclusive video interview with Stephen F. Balshi, MBE (https://www.aegisdentalnetwork.com/idt/videos/idt-extra-balshi/).
IDT Weekly
9/28/20 - S2 E39
Updates on Daniel Alter, MSc, MDT, CDT, and the Chicago Dental Society’s Midwinter Meeting, plus an article on intraoral scanners and an interview with Bill Barton, MM, BS, CDT, about digital dentures.
IDT Weekly
9/14/20 - S2 E37
Updates on the NBC’s practical examinations and a new COO of DSG, plus a CE article on digital full-arch implant reconstructions and a Viewpoint interview with Paul Cascone and Steaffani Dall.
IDT Weekly
9/7/20 - S2 E36
Updates on robot-assisted surgery and an Inside Dentistry survey about elective surgery volume, plus IDT International Digital Denture Symposium coverage and an IDT Product Talk featuring Mark Samuel Chan, DD.
IDT Weekly
8/31/20 - S2 E35
Updates on the IDS and a webinar from Kolbeck Dental, plus a column by Daniel Alter, MSc, MDT, CDT, and an online Q&A with Phil Carlino of Formlabs.
IDT Weekly
8/17/20 - S2 E33
Updates on the IDS and a significant 3D printing partnership, plus a MasterClass on biomechanics and a video interview with Renata Budny about federal classification.
IDT Weekly
8/10/20 - S2 E32
Updates on new legislation in Florida and Dentsply Sirona World going virtual, plus an article by Renata Budny on federal classification of the profession, and online updates about the IDT International Digital Denture Symposium.
IDT Weekly
8/3/20 - S2 E31
Updates on new developments in 3D printing technology, plus an article on biomechanics and a free ebook on occlusion.
IDT Weekly
7/20/20 - S2 E29
Updates on the IDT International Digital Denture Symposium and Panthera Dental, plus an article on 4D printing and a video interview with Chris Brown on printing ceramics.
IDT Weekly
7/13/20 - S2 E28
Updates on Robert Kreyer joining MicroDental Laboratories and Medit appointing a new CEO, plus an article on 3D printing ceramics and a video interview with Chuck Stapleton on multimaterial printing.
IDT Weekly
7/6/20 - S2 E27
Updates on a development in interactive biologic devices and an oral health program for non-dental healthcare professionals, plus an article on multimaterial 3D printing and a video interview with Jed Archibald, CDT, about AR and VR.
IDT Weekly
6/22/20 - S2 E25
Updates on the Fun ’N Sun Weekend and CDC guidelines for dental settings reopening (insidedentaltech.com/idt1200), plus a webinar on 3D printing with Dr. Marko Tadros.
IDT Weekly
6/15/20 - S2 E24
Updates on the market forecast for global consumables and research on immune responses to medical implants, plus a free ebook on dental photography.
IDT Weekly
6/8/20 - S2 E23
Updates on a survey of dentists during the pandemic and an investment in Amann Girrbach, plus AEGIS Dental Network’s COVID-19 resource page.
IDT Weekly
5/25/20 - S2 E21
Updates on teledentistry and the new PHI tool from Josef Kolbeck, plus a MasterClass about treating a head and neck cancer survivor and a webinar on 3D printing.
IDT Weekly
5/15/20 - S2 E19A
IDT’s Peter Pizzi, MDT, CDT, and Daniel Alter, MSc, MDT, CDT, discuss the legacy of the late Vincent Alleluia, CDT, MDT.
IDT Weekly
5/18/20 - S2 E20
Updates on the IDT Live Town Hall: Back to Work and NADL resources for reopening laboratories, plus an article on avoiding zirconia fractures and an online video discussion in memory of Vincent Alleluia, CDT, MDT.
IDT Weekly
5/4/20 - S2 E18
Updates on Vincent Alleluia’s passing and a call to action from the Santa Fe Group (insidedentaltech.com/idt1191), plus an article on splint therapy and a resource center for online educational opportunities (insidedentaltech.com/idt1192).
IDT Weekly
4/27/20 - S2 E17
Updates on dental professionals sharing STL files to fight COVID-19 and Henry Schein distributing a COVID-19 test kit, plus a column by Daniel Alter, MSc, MDT, CDT, about technology and an online resource for 3D printing PPE, ventilator components, and more (insidedentaltech.com/idt1183).
IDT Weekly
4/20/20 - S2 E16
Updates on the NADL’s guidance for the CARES Act (insidedentaltech.com/idt1180) and an online COVID-19 panel discussion hosted by Carbon (insidedentaltech.com/idt1181), plus an article on implant abutments and bars, and an online article about keeping morale up during difficult times (insidedentaltech.com/idt1182).
IDT Weekly
4/13/20 - S2 E15
Updates on Lithoz’s new Innovation Laboratory and Glenn Kennedy joining Open Implants, plus a CE article on creating smile symmetry and a free CE ebook on infection control (https://www.aegisdentalnetwork.com/idt/ebooks/guide-to-basic-infection-prevention-practices).
IDT Weekly
4/6/20 - S2 E14
Updates on Align Technology’s acquisition of exocad and Bego’s 3D printed ceramic crown, plus an article on minimal-prep veneers and our Product Talk series on AEGIS TV (https://www.aegisdentalnetwork.com/tv/idt-product-talk/).
IDT Weekly
4/2/20 - S2 E13A
In this special report, IDT’s Jason Mazda interviews Joshua Polansky, MDC, about 3D printing surgical masks to help during the COVID-19 crisis.
IDT Weekly
3/30/20 - S2 E13
Updates on infection control tips and DenMat’s new clear aligner solution, plus a special report on the coronavirus outbreak (https://www.aegisdentalnetwork.com/idt/2020/04/special-report-coronavirus?q=) and online resources for purchasing (aegisdentalnetwork.com/idt/2019/11).
IDT Weekly
3/16/20 - S2 E11
Updates on the coronavirus efforts and an event in Paris in June, plus an article on a complex treatment, and a webinar on digital dentures.
IDT Weekly
3/9/20 - S2 E10
Updates on the DLAT meeting and a recognition for Henry Schein, plus a TechEdge article on milling machine technology and information on IDT's online CE library.
IDT Weekly
3/2/20 - S2 E9
Updates on Chicago Midwinter Week and the Panthera Master Cup 2020, plus a feature on digital dentures and an online exclusive about the implications of divorce for laboratory owners. For more information on the Women in Dentistry organization, go to widrise.com.
IDT Weekly
2/17/20 - S2 E7
A preview of Chicago Midwinter and an update on Whip Mix’s new CEO, plus a CE article on occlusal concepts and an online resource for Chicago Midwinter.
IDT Weekly
2/10/20 - S2 E6
Updates on a new 3D printing alloy being developed, and a major investment in HeyGears, plus an article on desktop scanners and an ebook on emotional aspects of esthetic dentistry.
IDT Weekly
2/3/20 - S2 E5
Updates on a charity initiative from VHF and a milestone for Aspen Dental, plus a feature story on attracting and retaining young talent, and videos on digital dentures.
IDT Weekly
1/20/20 - S2 E3
Updates on the IDT Roundtable: Removable Prosthetics and Dentsply Sirona donating equipment to UMKC, plus a CE article on implant dentistry and a free ebook on digital workflow.
IDT Weekly
1/13/20 - S2 E2
Updates on the upcoming exocad Insights event and Carbon’s new President/CEO, plus an article on 3D printing materials and an exclusive online Q&A with speakers from the 2019 IDT International Digital Denture Symposium.
IDT Weekly
1/6/20 - S2 E1
Updates on Medicare benefits and an award for Henry Schein’s Stanley Bergman, plus an article on state regulations for dental laboratories and a video Tech Insider with Richard Zimmermann, DDS.
IDT Weekly
12/30/19 - S1 E52
Updates on IDT’s Daniel Alter visiting vhf headquarters and the Midwest Dental Laboratory Association merging its annual show with the Minnesota Dental Association’s, plus an exclusive article from Bruce Bryen on financing equipment, and an ebook on getting the most out of your scrap metal.
IDT Weekly
12/23/19 - S1 E51
Updates on the NADL’s Vision 21 meeting and a new FDA clearance for a 3D printing material from Keystone Industries, plus a CE article on OSHA standards and a free webinar on laboratory communication in anterior tooth shade matching.
IDT Weekly
12/16/19 - S1 E50
Updates on the Greater New York Dental Meeting and a new smart inventory management solution, plus an article by Joshua Polansky on digital communication and an online exclusive by Bruce Bryen on taxes.
IDT Weekly
12/9/19 - S1 E49
Updates on the NADL’s efforts to create an association health care plan and Dentsply Sirona's Dr. Teresa Dolan, plus a MasterClass on photography and an online exclusive interview with Valerie Abucejo-Poon.
IDT Weekly
11/25/19 - S1 E47
Updates on the IDT Roundtable: Removable Prosthetics and the International Team for Implantology, plus Product iNavigator showcases and a Video Tech Insider with Vincent Verderosa, MDT, CDT.
IDT Weekly
11/18/19 - S1 E46
Updates on the ECDL and DLOAC and Glidewell Dental, plus highlights from the Product iNavigator and a video interview with Robert Kreyer and Dr. Stephen Wagner.
IDT Weekly
11/11/19 - S1 E45
Updates on robotic devices for implants at Boston University and an award for Whip Mix, plus Product iNavigator Game-Changing Products and a video interview with David Jackson.
IDT Weekly
11/4/19 - S1 E44
Updates on new digital denture education and laboratory professionals lecturing at the Greater New York Dental Meeting, plus our annual Product iNavigator and an eBook on intelligent imaging (https://www.aegisdentalnetwork.com/idt/ebooks/redefining-digital-workflow-with-intelligent-imaging).
IDT Weekly
10/28/19 - S1 E43
Updates on market forecasts and Panthera Dental, plus a CE article on the occlusal effects of wear and a free webinar on digital dentures.
IDT Weekly
10/21/19 - S1 E42
Updates on the Eastern Conference of Dental Laboratories and a custom device to help people Tourette Syndrome, plus an article on consolidation in the industry and an episode of IDT's Product Talk.
IDT Weekly
10/14/19 - S1 E41
Updates on Dr. Edward McLaren’s new training center and Dentsply Sirona’s inLab demo vans, plus an article by Dr. Valerie McMillan and an episode of IDT’s Product Talk featuring Vincent Verderosa.
IDT Weekly
9/30/19 - S1 E39
IDT Weekly
9/23/19 - S1 E38
IDT Weekly
9/16/19 - S1 E37
IDT Weekly
9/2/19 - S1 E35
IDT Weekly
8/26/19 - S1 E34
IDT Weekly
8/19/19 - S1 E33
IDT Weekly
8/12/19 - S1 E32
IDT Weekly
8/5/19 - S1 E31
IDT Weekly
7/29/19 - S1 E30
IDT Weekly
7/22/19 - S1 E29
IDT Weekly
7/8/19 - S1 E27
IDT Weekly
7/1/19 - S1 E26
IDT Weekly
6/24/19 - S1 E25
IDT Weekly
6/10/19 - S1 E23
Updates on the IDT International Digital Denture Symposium and Alexander Wunsche, plus a CE article on laboratory labeling of removable appliances and an on-demand webinar on digital dentures.
IDT Weekly
6/3/19 - S1 E22
Updates on the IDT International Digital Denture Symposium and Dental Technician and CDT Appreciation Month, plus an article by Daniel Alter on the technician’s role and beyond, and an exclusive online article on Ivoclar Vivadent’s retiring CEO Robert Ganley.
IDT Weekly
5/27/19 - S1 E21
IDT Weekly
5/13/19 - S1 E19
IDT Weekly
5/6/2019 - S1 E18
IDT Weekly
4/29/19 - S1 E17
IDT Weekly
4/15/19 - S1 E15
IDT Weekly
4/8/19 - S1 E14
IDT Weekly
4/1/19 - S1 E13A
IDT Weekly
3/25/19 - S1 E12
IDT Weekly
3/18/19 - S1 E11
IDT Weekly
3/11/2019 - S1 E10
IDT Weekly
2/25/19 - S1 E8
IDT Weekly
2/18/19 - S1 E7
IDT Weekly
2/11/2019 - S1 E6
IDT Weekly
1/28/19 - S1 E4
IDT Weekly
1/21/19 - S1 E3
IDT Weekly
1/14/19 - S1 E2
Remove biofilm, plaque and calculus thoroughly with ease
9/11/2024 - S6 E3
Using this simple, fact acting gel can protect your patients teeth and restorations from biofilm buildup that promotes decay and failure.
New restorative materials offer an ideal, time saving solution for single visit chairside treatments
7/30/24 - S6 E2
Cut time and costs with new advances in indirect restorative materials that deliver high-wear resistance, smooth margins and esthetic results.
Simplified Shading Systems Offer the Perfect Shade for Your Restorations
4/10/24 - S6 E1
These new simplified shading systems offer the widely desired chameleon effect we want from our composites. Simplify your overhead without compromising your results.
Unishade composites for anterior and posterior restorations
4/11/23 - S5 E1
Unishade composites pull color from the surrounding tooth structure allowing your restoration to blend in seamlessly. They have exceptional strength, low wear and polish like glass so you can use them in both the anterior and posterior.
A Bonded Restoration is a Stronger Restoration
11/18/22 - S4 E4
Enhance the predictability of success in crown cementation by bonding your restoration using a bonding agent with MDP technology and a dual cure cement with high shear bond strength.
Using the latest materials to protect the pulp and enhance your restorations.
11/18/22 - S4 E3
Don’t let your restorations be the start of the problem for your patients. By using the proper materials, you can enhance your direct and indirect restorations, protect the pulp and promote pulp vitality with the release and recharge of Calcium and Flouride ions in the tooth.
The Psychology of Financial Decision-Making
4/8/22 - S4 E2
Do you know the nature of the psychology behind financial decisions? In this episode, Ankur Gupta, DDS, discusses the five barriers to saying yes to dental treatment. Upon understanding these barriers, you can learn how to better communicate with your patients to increase emotional connection and treatment acceptance.
The New New Patient Experience
4/8/22 - S4 E1
There will always be aspects of dentistry that will be out of the clinician’s control. However, the new patient experience is not one of them. In this episode, Ankur Gupta, DDS, discusses various ways that the entire dental team can wow new patients and make their experience extraordinary from the minute they walk in the door.
Improve the long-term success of your composite restorations
6/23/21 - S3 E2
Did you know up to 70% of composite restorations fail due to secondary decay? By incorporating bio-active materials into your protocol you can rest easier knowing the materials you are using protect against secondary decay and promote healing of the natural tooth structure.
Light Curing has Finally Evolved – Don’t be Left Behind
4/22/21 - S3 E1
Do you remember the days of rotary telephones? Technology is constantly evolving, and light curing should too! Curing technology has remained largely unchanged over the last decade. In this presentation you will be introduced to an evolution in light curing. One that overcomes the limitations of curing lights as we know them. Review the critical criteria of evaluating curing lights and how you can achieve better depth of cure, higher conversion (hardness), with less shrinkage (associated with sensitivity and failure.)
Improving the Local Anesthetic Experience: Using Vibration as a Counter Stimulus
11/25/20 - S2 E1
Dentists use many tools to decrease local anesthetic injection pain for patients, including the use of topical anesthesia, plain solutions, smaller needles, and computer controlled devices. However, a commonly used technique of delivering a counter stimulus, either by wiggling the patient's cheek or better yet by using a vibration device could be an important factor in improving the local anesthetic experience.
Cementation Confusion- Bonding Lithium Disilicate Restorations
12/1/19 - S1 E3
Dr. Mike DiTolla discusses cementation systems
Cementation Confusion- Cementation Protocols
12/1/19 - S1 E2
Dr. Mike DiTolla discusses the three main cement categories: adhesives, self-adhesive and conventional
Advances in Endodontic Technology
9/26/24 - S7 E1
Brooke Blicher, DMD; Rebekah Pryles, DMD; and Michael Tulkki, DDS, MS discuss advances in endodontic technology in what promises to be a conversation that gets straight to the root of the matter.
The Advantages of Clear Aligners
9/28/2023 - S6 E3
Daniel Berant, DMD; Jeffrey Briney, DDS and Drew Ferris, DDS discuss the shifting role of orthodontic treatment in general practice, with a focus on advances in aligner therapy.
Innovations in Composite Restorations
9/1/2023 - S6 E2
Dimple Desai, DDS; Thomas Dudney, DMD; Marcos Vargas, DDS, MS discuss the latest and greatest in composite dentistry. From material advances to techniques for consistent success across a range of clinical presentations, the Roundtable is your ticket to candid insights and advice from the field’s most respected thought leaders.
Enhancing General Practice with Clear Aligner Therapy
5/2/2023 - S6 E1
Jeffrey Briney, DDS; Michael DiTolla, DDS; Kwane Watson, DMD discuss incorporating aligner therapy into the general practice to drive revenue, improve clinical outcomes, and expand treatment options for challenging cases and underserved populations.
Innovations in Indirect Restorations
12/5/22 - S5 E5
Miles Cone, DMD, CDT, FACP; Chad Duplantis, DDS, FAGD; Clint Stevens, DDS discuss the latest innovations and clinical strategies for success with indirect restorations.
Advances in Clear Aligners
10/3/22 - S5 E4
Payam Ataii, DMD; Sabiha Bunek, DDS; and Loray Spencer, DDS discuss the shifting role of orthodontic treatment in general practice, with a focus on advances in aligner therapy.
Advancements in Direct Composite Restorations
9/6/22 - S5 E3
Mike DiTolla, DDS; Brian LeSage, DDS; Devin McClintock, DDS discuss direct composite restorations: from material advances to timeless techniques.
Cementation Clarification
1/27/22 - S5 E1
Gary Alex, DMD, AAACD; Todd Snyder, DDS, FAACD; Marcos Vargas, BDS, DDS, MS discuss material advances, choices, and protocols and how they impact the longevity of restorations.
The Impact of Aligner Therapy
9/29/21 - S4 E5
Payam Ataii, DMD; Diana Batoon, DMD; and Robert Lowe, DDS discuss the changing landscape of orthodontics with a focus on the impact of aligner therapy in the professional and consumer markets.
Optimizing Whitening Treatment
8/30/21 - S4 E4
Joyce Bassett, DDS; Amanda Seay, DDS; and Troy Schmedding, DDS discuss and debate the latest in tooth whitening technology.
Implementing Laser Dentistry
5/27/21 - S4 E2
Scott Benjamin, DDS; John Flucke, DDS; and Robert Levine, DDS discuss laser dentistry.
Optimizing Indirect Restoration
3/18/21 - S4 E1
Nathaniel Lawson, DMD, PhD; Clint Stevens, DDS; and Gary Radz, DDS discuss the latest advances for indirect restorations in the first Roundtable of 2021.
The Myths and Realities of Bioactivity
12/17/20 - S3 E6
Chad Duplantis, DDS; Thomas Dudney, DMD; and Fay Goldstep, DDS discuss the myths and realities of this growing category of materials.
Challenges in Endodontics
11/12/20 - S3 E5
Gregg A. Helvey, DDS, CDT; Rebekah Lucier Pryles, DMD; and Jonathan Uhles, DDS discuss endodontic principles and procedures that illuminate how developments in technology, techniques, and materials are advancing the predictable delivery of care for both specialists and general practitioners in this discipline.
The Advantages of Intraoral Scanning
10/22/20 - S3 E4
Robert Ritter, DMD; Edward Shellard, DMD; and Franklin Shull, DMD discuss the integration, implementation, and advantages of digital technology over its analog ancestors.
Clear Aligners in the General Practice
9/24/20 - S3 E3
Payam Ataii, DMD; Andrew Ferris, DDS, MS; Dan German, DDS discuss and debate the merits of aligner therapies and orthodontics in the general practice.
Advances in CAD/CAM Dentistry
3/26/20 - S3 E2
Brad Haines, DDS; Valerie McMillan, DDS, MS; Clint Stevens, DDS discuss how CAD/CAM is moving restorative dentistry forward.
The Forefront of Endodontics
12/5/19 - S2 E4
James Bahcall, DMD, MS; Brooke Blicher, DMD; and James Smith, DMD, discuss and debate the technologies and techniques on the forefront of endodontics.
Demystifying the Bonding of Zirconia
9/25/19 - S2 E3
Gary Alex, DMD; Markus B. Blatz, DMD, PhD; and Nathaniel Lawson, DMD, PhD, discuss indications and techniques for bonding zirconia restorations.
Optimizing Outcomes in Implant Dentistry
4/17/19 - S2 E2
Suheil Boutros, DDS, MS; Barry Levin, DMD; and Sanda Moldovan, DDS, MS, discuss current topics in implantology.
The Digital Divide
6/5/16 - S1 E5
Next Generation Periodontics
5/16/16 - S1 E4
The State of Adhesive Dentistry
1/4/16 - S1 E3
Bob Ziemek - Strategy Milling
10/3/23 - S5 E1
Bob Ziemek discusses his experience with Strategy Milling with the host of IDT’s Product Talk, Peter Pizzi, MDT, CDT.
Josef Kolbeck, CDT – Kulzer’s removables product line
10/1/22 - S4 E3
Josef Kolbeck, CDT, discusses his experience with Kulzer’s products for denture fabrication with the host of IDT’s Product Talk, Peter Pizzi, MDT, CDT.
Alexander Wünsche, CDT – Amann Girrbach’s Ceramill Matik and Ceramill Zolid Gen-X
10/1/22 - S4 E2
Alexander Wünsche, CDT, discusses his experience with Amann Girrbach’s Ceramill Matik and Ceramill Zolid Gen-X with the host of IDT’s Product Talk, Peter Pizzi, MDT, CDT.
Cody Iverson, CDT – Kulzer’s cara Print 4.0
9/30/21 - S3 E4
Cody Iverson, CDT, discusses his experience working with Kulzer’s cara Print 4.0 with the host of IDT’s Product Talk, Peter Pizzi, MDT, CDT.
Minh Tran – Keystone Industries’ KeySplint Hard
9/30/21 - S3 E3
Minh Tran discusses his experience working with Keystone Industries’ KeySplint Hard with the host of IDT’s Product Talk, Peter Pizzi, MDT, CDT.
BJ Kowalski – Dentsply Sirona’s Lucitone Digital Print
9/30/21 - S3 E2
BJ Kowalski discusses his experience working with Dentsply Sirona’s Lucitone Digital Print with the host of IDT’s Product Talk, Peter Pizzi, MDT, CDT.
Brandon Osborn - Swissmeda's SMOP
12/1/20 - S2 E2
Brandon Osborn shares his experience using Swissmeda's SMOP implant planning software with the host of IDT's Product Talk, Peter Pizzi, MDT, CDT.
Mark Samuel Chan, DD - Keystone Industries KeySplint Soft
7/28/20 - S2 E1
Mark Samuel Chan, DD, shares his experience using KeySplint Soft for 3D printing bite splints with the host of IDT's Product Talk, Peter Pizzi, MDT, CDT.
Vincent Verderosa, MDT, CDT - Custom Milling Center Digital Dentures
10/22/19 - S1 E2
Vincent Verderosa, MDT, CDT, shares his experience using Custom Milling Center as an outsourcing partner for digital dentures with the host of IDT's Product Talk, Peter Pizzi, MDT, CDT.
IDH Weekly
4/22/20 - S2 E17
News on the U.S. Food and Drug Administration rule requiring new health warnings on cigarette packages and in cigarette advertisements, positive conflict resolution for workplace disagreements, and an overview of the article Craniofacial Risk Factors for Sleep-Related Breathing Disorders by Kent Smith, DDS.
IDH Weekly
4/15/20 - S2 E16
News on a tech startup using artificial intelligence to improve oral health, ideas for parents with children home during coronavirus school closures, and an article on improving cancer screening protocol by Debbie Zafiropoulos.
IDH Weekly
4/8/20 - S2 E15
News on the ADA’s statement on recent Wisconsin anti-fluoridation movements, learn how to join the Women In Dentistry group, and information on accessing the Vaping Webinar Update hosted by Edie Gibson, RDH, MS.
IDH Weekly
4/1/20 - S2 E14
News on risks of exposing children to harmful chemicals when sanitizing during coronavirus pandemic, spotlight on Kate Trivett, RDH, and information on the upcoming webinar “Strategies to Break the Chain of Infection in Your Practice” with Michelle Strange, MSDH, RDH.
IDH Weekly
3/25/20 - S2 E13
News on Delta Dental’s new "Water’s Cool @ School!" grant program, easy instructions to make hand soap when stores sell out, and the Continuing Education article “Mental Floss: Oral Health and Dementia, Part 2, by Maria L. Geisinger, DDS, MS and Hussein S. Basma, DDS, DESS, MS.
IDH Weekly
3/18/20 - S2 E12
News on the ADHA’s statements on the Coronavirus, an insightful article on improving your whole-body health to improve your personal and professional life, and the article “New Coronavirus Outbreak: Has a SARS-like Disease Returned?.”
IDH Weekly
3/11/20 - S2 E11
News on the University of South Dakota Department of Dental Hygiene students engaging in service-learning activities, the top ten series poll question on one thing you can’t live without as a dental hygienist, and a Continuing Education article on dentin hypersensitivity.
IDH Weekly
2/26/20 - S2 E9
IDH Weekly introduces QR codes, announcement on the top ten segment dedicated to hygienists, and a new article the business end of hygiene.
IDH Weekly
2/19/20 - S2 E8
News on a bioactive peptide could prevent tooth decay and heal existing cavities, a guide on becoming a master at meal prepping, and a spotlight on Jennifer Geiselhofer, RDH.
IDH Weekly
2/12/20 - S2 E7
News on the recent rule change in North Carolina allowing hygienists to provide certain services without the presence of a dentist, tips to increase your water intake, and a CE article comparing opinions of dentists and hygienists on models allowing dental therapists.
IDH Weekly
1/29/20 - S2 E5
News on Sealant Day sponsored by the Harcum College Dental Hygiene Program, guide to educating parents on oral hygiene, and a CE webinar on dental lasers.
IDH Weekly
1/22/20 - S2 E4
News on virtual reality software created for European dental education, volunteer opportunities resources, a CE article addressing social media behaviors and dental licensure, and the Product of the Week: PRO-SYS® VarioSonic® electric toothbrush.
IDH Weekly
1/15/20 - S2 E3
News on the remote access to dentistry, exercises that burn the most calories in 30 minutes, tips for digital scanning success and the Product of the Week: Vella®️ 5% Flouride Varnish from Preventech®️
IDH Weekly
1/3/20 - S2 E1
News on a study claiming dental health and diet may impact psoriasis, how to get organized to achieve New Year’s resolutions, spotlight on outstanding hygienist, Meg Atwood, RDH, MPS, and the Product of the Week: Directa Dental Fossil-free Bio Products.
IDH Weekly
12/27/19 - S1 E12
News on FDA Medwatch reporting on do-it-yourself dentistry, part 4 of the 4-part job search series on evaluating a job offer, a CE article on periodontal tissue bioengineering, and the Product of the Week: Oral-B®️ Genius™️ X Electric Toothbrush.
IDH Weekly
12/18/19 - S1 E11
Happy holidays from IDH Weekly, news on Aspen Dental’s recent mission trip, part 3 of the 4-part job search series covering how to ace interviews, an article on bleeding on probing scoring, and the Product of the Week: Prisyna®️ Moisyn Dry Mouth Oral Rinse.
IDH Weekly
12/11/19 - S1 E10
News on new clinical educator program offered by Penn Dental Medicine and the Academy for Advancing Leadership, part 2 of the 4-part job search series featuring resume tips, safety in sterilization updates, and the Product of the Week: Pulpdent®️ Embrace™️ WetBond™️ Pit & Fissure Sealant.
IDH Weekly
12/4/19 - S1 E9
News on updated academic standards for treating patients with special needs, part 1 of our 4-part job search series on how to begin researching a new position, a CE on custom-fitted bleaching trays, and the Product of the Week: Mirror Suction Double-Sided from Hager Worldwide.
IDH Weekly
11/29/19 - S1 E8
News on the creation of Eco-friendly floss, cost-effective ways to replenish your winter wardrobe, a CE on instrument cassettes in infection control, and the Product of the Week: Ivory®️ ReLeaf ™️ from Kulzer.
IDH Weekly
11/20/19 - S1 E7
Products to look for at the Greater New York Dental Show, how to resist eating too many holiday treats, a CE article on Nutrition for Better Healing, and the Product of the Week: DentaPure from Crosstex.
IDH Weekly
11/6/19 - S1 E5
News of a recent study claiming that children with neurologic impairments may reduce chances of repeated pneumonia with proper oral health habits, suggestions for proper hand care, Inside Dental Hygiene recognizes outstanding dental hygienists throughout the country in our Hygiene Spotlight, and the product of the week: AeroPro™️ Cordless Handpiece System.
IDH Weekly
10/30/19 - S1 E4
Highlights on the dental bar trend, tips on how to interact with dental hygiene peers, a noteworthy CE on the future of oral cancer diagnosis, and the product of the week: Directa Dental Fossil-free Bio Products.
IDH Weekly
10/23/19 - S1 E3
Details on the recent discovery of a way to regrow tooth enamel, tips to improve your sleep habits, a groundbreaking CE on evaluating patients for sleep disorders, and the product of the week: Dentsply Sirona Purevac®️ HVE System.