Don't miss a digital issue! Renew/subscribe for FREE today.
Inside Dental Technology
February 2011
Volume 2, Issue 2

The Future of Chairside

Over the next decade, dentists will also be bombarded with emerging technologies and clinical research that will revolutionize the way that dentistry is practiced. “The dentist is going to be looking at more computer screens and more data,” predicts Claudio Levato, DDS, a private practitioner in Bloomingdale, Illinois, and pioneer in clinical technologies. “By 2020, I think we’ll have more tasks to delegate to auxiliary staff, such as routine procedures.”

Within the broader oral healthcare profession, significant strides have already been made in remineralization, and Claudio Levato, DDS, says this will be a major contributing factor in enabling clinicians to treat disease at its early stages and, therefore, actually prevent expensive restorative procedures. “I think the future is extremely promising,” Dr. Levato says.

And he is not the only one. Below, a number of dental experts share their top predictions for areas of future growth and new development in dentistry.

Artificial Intelligence

Dr. Levato is hoping that dentistry makes another quantum leap and begins using artificial intelligence. This will require software to advance to the next level, where decision-making capabilities are integrated into the system.

“So, when dentists do their initial examination, they’ll put in all this diagnostic information, which can be delegated. This includes x-rays, intraoral photos, measurements, charting existing conditions, the patient’s medical history, and the patient’s habits,” he explains. “Then the software compiles these parameters and helps determine a treatment plan and a differential diagnosis for what needs to be done for the patient.”

Dentists will be able to take evidence-based dentistry to another dimension that involves standards, Dr. Levato says. If someone presents with A, B, and C, has certain risk factors, and has a certain lifestyle, artificial intelligence software would help the dentist to determine the procedure that would offer the greatest longevity and best results, he suggests.

Biological Treatments

Allan G. Farman, BDS, PhD, MBA, DSc, president of the American Academy of Oral and Maxillofacial Radiology, notes that today’s cutting-edge research is not necessarily cutting because it is not using handpieces and burs. Rather, it involves bioengineering, using perhaps stem cells to grow replacement teeth, and from there developing a naturally occurring implant.

“In the future we may see a greater move toward getting the teeth to actually restore themselves by simulating normal biological methods, such as the deployment of extra dentin as a seal against the spread of dental caries in adults,” suggests Dr. Farman, a professor of radiology and imaging science at the University of Louisville School of Dentistry.

With respect to biology, it seems technology is being driven toward directing a specific reaction in the host, according to Frederick A. Rueggeberg, DDS, MS, professor and section director of Dental Materials in the Department of Oral Rehabilitation at the Medical College of Georgia School of Dentistry. Thus, concepts associated with the current use of implants containing bone morphogenetic proteins or other bio-active factors to induce a localized biological reaction will be applied elsewhere to more predictably re-grow missing bone structure of edentulous ridges and lost crestal bone in periodontal disease, he says. The futuristic “restorative materials” would then be used as carriers for such substances.

Digital Impression-Taking

Dr. Farman says it is important to consider what materials may phase out of dentistry by 2020. He believes that physical, chemical impression materials will become obsolete in the next 10 to 15 years.

“The reason they’re not obsolete at the moment is that the resolution we have with CBCT is not adequate to entirely replace the impression tray,” Dr. Farman reasons. “However, there are some attempts at this point in time at using photographic scans to create models, such as in orthodontics (eg, Invisalign).”

On the other hand, Lee Culp, CDT, chief technology officer of Dental Technologies Inc, believes that all dentists should be looking at some type of digital-impressioning system at this ›››› point, or at least starting to gather information about them. Digital impressions are the hot topic, but because there is still a great deal of confusion in the marketplace about them, dentists have been slow to adopt the technology, he says.

“There are currently four companies that offer digital-impression acquisition units, and by 2020, I think the majority of impression materials will be gone. You’re going to see models and stones go the way of the past,” Culp predicts. “This technology is getting better and better, as well as easier to use. I think it’s something that dentists should become familiar with because I think that one of the major technological changes of the next 10 years will be the disappearance of impression materials and the move to digital impressions.”

Personalized Dentistry

Using information and data from a patient’s level of gene expression to select a medication, provide individual treatment, or start a prevention regimen, is where dentistry is headed in terms of personalized care, says Isabel Garcia, DDS, MPH, deputy director of the National Institute of Dental and Craniofacial Research (NIDCR). In the future, such an approach will enable dentists to provide patients with much less of the generalized, one-size-fits-all care that is administered today, and more tailored interventions that rely on genetic information and other data specific to the individual, she says.

“There are a couple of factors that I think will drive that transition to personalized dentistry. One is the growth of evidence-based dentistry, such as from the research supported by the NIDCR—like its large-scale, dental practice-based research networks,” Dr. Garcia says. “As the evidence begins to accrue, dentists will have information just a few computer clicks away to better classify their patient and tailor treatment to their specific oral needs.”

The other factor that will drive the transition to more personalized dentistry is the rise of biology-based dentistry, Garcia says. In the future, dentists will rely on a range of diagnostic and treatment tools that rapidly and efficiently process a patient’s biological information, from genes to protein, she says. Although such resources are being used now, Dr. Garcia believes the trend will continue and grow.

Remineralization of Tooth Structures

“Controlled dentin and enamel remineralization can be expected to be highly advanced in the future,” Dr. Rueggeberg predicts. “Literature currently suggests that we can remineralize dentin, not in chunks and globs as is currently clinically done, but in formation of microcrystals, the same size and location as are present in healthy tooth structure.”

These advances are still in the developmental stage and are not yet commercial realities, he says. Perhaps future restorative materials will merely be temporary “bandages” protecting underlying substances that, over time, will slowly remineralize decayed tooth structure and, eventually, lead to the intraoral development of an intact, functioning tooth once again, instead of replacing missing tooth structure with synthetic substitutes.


Dr. Rueggeberg says that the next logical step in CAD/CAM restorative processes is the actual use of microprocessor-controlled robotic devices to prepare teeth in vivo. Then, using digital information recorded from the preparation sequences performed, the 3-D dimensions of the prepared tooth, as well as the optical impression of its environment (ie, the neighboring and opposing occlusion) can be sent to a chairside milling device that immediately prepares the restoration without impressions, models, or laboratory processing, he suggests.

Dr. Farman shares a similar vision. At the moment, he says dentistry is still basically in the era of Michelangelo, “to a large extent chiseling away at the teeth, albeit with high-speed handpieces, but free hand.”

In the future, dentists are going to be architects rather than artists, he predicts. They are going to be designing restorations using CAD programs in computers. At some point they will move toward biological treatments. Then, there will be the use of robots that can more readily remove the necessary tooth structure more precisely and maybe on multiple teeth at the same time, either using mechanical methods or perhaps even some refined laser techniques for preparing the tooth, he suggests.

“These robotic devices presumably also will be able to take impressions by using optical scanning methods (ie, as opposed to physiochemically), with integration of the individual images that are then produced,” Dr. Farman continues. Then, using transfer of those light-based images, dentists will be able to send the impression to the laboratory (or in-house facility) for fabrication of the restoration.”

Stem Cells to Grow Replacement Teeth

“Beyond rapid technology and reduced costs for genetic testing to determine relative risk, we also have blended genetics with stem cell biology,” says Harold Slavkin, DDS, dean of the University of Southern California School of Dentistry. “This merger is providing fuel to advance tissue engineering, such as bone morphogenetic proteins and stem cells for bone regeneration; pulp-derived stem cells to design and fabricate roots of teeth with associated periodontal ligaments connecting synthetic root to adjacent alveolar bone; and many other types of tissue engineering (eg, mucosa, salivary glands, cartilage, muscle, nerve, etc).”

© 2024 BroadcastMed LLC | Privacy Policy