KATANA™ Zirconia ONE
ONE SOLUTION, ONE BLOCK
The solution for strength,
natural beauty, and workflow efficiency
all in ONE block.
1) According to ISO 6872:2015, Three-point fl exural strength test Sample size 1.2x4x14mm, Span length 12mm Sour ce: Kuraray Noritake Dental Inc.
2) Compared to conventional product, according to the verifi cation of the CAD/CAM equipment’s manufacturer.
NATURAL BEAUTY: GRADATION OF COLOR
SUPER FAST MILLING &
18 MINUTES SINTERING FOR CEREC
The collaboration of Kuraray Noritake Dental’s superior materials technology and Dentsply Sirona’s CEREC Primemill with the Speed Fire oven now makes it possible to mill in under 5-minutes and sinter a full zirconia restoration in 18-minutes.
CHOOSE YOUR PREFERRED FINISHING TECHNIQUE
1 – Pre-sinter Polish*
Polishing before the sintering
Polishing after the sintering
Finishing with CERABIEN™ ZR FC Paste Stain
*In the case of pre-sinter polishing, if the prosthesis is not sufficiently dried after milling, esthetic outcome may not be optimal.
EXCELLENT MARGINAL FIT
Accurate marginal fi t is essential to achieve long term success with restorations from both the mechanical and biological points of view.
KATANA™ Zirconia Block (A) shows smooth margins.
A lithium disilicate glass ceramic (B) shows irregular margins.
Picture Source: Kuraray Noritake Dental Inc.
CEREC: WORKFLOW
*Before using this product, be sure to read the Instructions for Use supplied with the product.
CERABIEN™ ZR FC Paste Stain: WORKFLOW
2. Polish areas in contact with opposing tooth* (For finishing with polishing alone, complete entire crown while polishing) ‘Refer to “Polishing method” given below
3. Alumina sandblast the surface of the crown (50-70 μm, 0.2 MPa / 2bar)
4. Clean restoration using an ultrasonic cleaner (in alcohol or acetone or steam cleaner)
5. Apply glaze and bake
KATANA™ Cleaner: WORKFLOW
3. Cement the restoration according to the manufacturer instructions